Quote:
Originally Posted by JustinChase
I don't yet know/understand how the RV automatically uses water from city supply when connected, or tank when city is not connected. Once I understand this, I can probably figure out where to put the pump to pressurize everything.
|
The pump only draws water from the tank, not from the outside water. I suppose you could T into the fresh water line but you would have to install a check valve between the T in the fresh water and the tank so you would not be filling the tank when you have it hooked to city water. In this way your pump should come on whenever your pressure is less than the minimum pressure your pump is set to.
Make sense?
Threaded Mode
