|
|
01-06-2018, 04:10 PM
|
#21
|
Junior Member
Join Date: Jan 2016
Location: Thibodaux, LA.
Posts: 25
|
At least they weren't 90 degrees off!
BTW, sorry for not editing the photo before posting.
__________________
|
|
|
01-06-2018, 04:21 PM
|
#22
|
Senior Member
Join Date: May 2005
Location: Home Prescott, Az
Posts: 1,019
|
Quote:
Originally Posted by rouxguy
At least they weren't 90 degrees off!
BTW, sorry for not editing the photo before posting.
|
I looked at your photo and had to look closer to see it was not correct, but thats OK, you could get a job at the RV plant and fit right in (Big Grin)
__________________
__________________
2013 Tiffin Allegro 34 QFA
2015 Cadillac SRX (towed)
2019 Tesla Model X
1991 Avanti Conv
|
|
|
01-06-2018, 05:24 PM
|
#23
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Inspectors? They have inspectors?
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
01-07-2018, 10:13 AM
|
#24
|
Senior Member
Join Date: Jun 2009
Posts: 455
|
Quote:
Originally Posted by wingnut60
Inspectors? They have inspectors?
|
I was surprised at how many QC people I saw when we did a plant tour in 2015. Seemed there was one at each main station, with a roll of blue tape marking items.
Two things caught my attention, 1st that they were actually doing it and 2nd, the amount of blue tape markers, both pre and post paint.
But at least there were markers.
|
|
|
01-07-2018, 01:53 PM
|
#25
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Sure have a lot of defects that get thru into dealers if they have all the QC people you indicate. I have been to the factory twice (years ago) and at the time they were using red markers on the units and lots of them. Seems only the color has changed, not the results...
Makes you wonder how many of the markers are accounted for in QC.
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
01-30-2018, 01:52 PM
|
#26
|
Junior Member
Join Date: Jan 2016
Location: Thibodaux, LA.
Posts: 25
|
More Leaks!!!!
The saga continues, so far I've had the all roof caulking renewed, AC seals changed and scare lights sealed. We had heavy rains last week while camper was stored at home with slides in. I found two large puddles of water between entry door and fridge in the middle of the floor, I don't see any evidence of the water coming from the ceiling. Also large puddle in center of living room, once again no evidence of coming from ceiling.
Is it possible water is leaking through slide seals and collecting on the floor?
THANK YOU IN ADVANCE FOR YOUR SUGGESTIONS?
Mike
2015 MS 38 RSSB3
|
|
|
01-30-2018, 04:05 PM
|
#27
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
There are several ways for water to get in even tho the slides are closed. Make sure all the seals on the slide faces (outer edges that face inward) are all intact--usually the upper corners tear quickly.
Sometimes the culprit is the lower horizontal molding that all the slides have at the bottom sides--check closely that there is a caulking seal all along the top edge of the molding.
Since the trailer is at home--strongly suggest that you make the effort during the next rainstorm to be out in the trailer and see where the water is coming from--or maybe make your own rain with a water hose with someone inside.
Hope you find a solution to the mystery....
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
01-31-2018, 01:10 PM
|
#28
|
Junior Member
Join Date: Jan 2016
Location: Thibodaux, LA.
Posts: 25
|
Thanks Joe, I had already changed some out some of the D seals. Getting really discouraging, I think I have it corrected every time we fix something only to find more water.
|
|
|
01-31-2018, 08:40 PM
|
#29
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
I never had a problem with my old '05 TK3, but with this new RSSA, we have noted some wet carpet after traveling but not when parked with slides out. Puzzling....
Thinking the D seals were maybe not doing the job, I added foam gasketing all around the slide facing where it meets the D seal, thinking this would compress it better. So far, been ok in the rain, but really haven't traveled much in wet weather since I put the foam gasket on. This is the same stuff you get a HD/Lowes/WM that has tape you peel to stick it to the window frames. Not hard to do, but lots of footage when you do all 4 slide faces. Just an idea....
__________________
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
|
|
Thread Tools |
Search this Thread |
|
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|