Thread Tools Search this Thread Display Modes
Old 03-18-2017, 07:00 AM   #1
Junior Member
Join Date: Jan 2017
Posts: 7
2017 38RSSA Closet Problem

The slopping wood portion of our closet roof was originally just stapled in position. It has now pulled out the staples. Question for those who have experienced the same issue: how did you resolve it?

Okieboy is offline   Reply With Quote
Old 03-18-2017, 11:21 AM   #2
Senior Member
Join Date: Feb 2013
Location: on the road
Posts: 342
Sounds like you should be covered under warranty. I assume you meant "sloping".

2015 RAM LongHorn Dually Air ride Aisin 4:10's

2016 MS 39TKSB3 "Highly Elited"
Cummins12V98 is offline   Reply With Quote
Old 03-18-2017, 02:35 PM   #3
Site Team
Join Date: Sep 2005
Location: Wherever the Suites is
Posts: 1,945
I think there isn't enough backing to really hold anything up in that area. On our '15, it was loose when we checked it out, and they fixed it somehow. Probably not to last thru too many trips. Ours has a 'wood' strip across that is the loose part, and the small staples were visible on the backside of the strip. Appears the staples only go into the ceiling material--nothing there to hold a staple. You might try some glue on the strip if that is the part you are talking about.
Let us know what you figure out--to me, it isn't worth a warranty hassle, just another thing done on the cheap.
2015 38RSSA #7382
2005 TK3 #1869, 10 yrs of memories
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 03-20-2017, 06:45 AM   #4
Junior Member
Join Date: Jan 2017
Posts: 7
Yes, I meant sloping. Yes, still under warranty but it may not be worth the ty hassle since the solution may be just more ineffective staples.
Okieboy is offline   Reply With Quote
Old 03-20-2017, 09:14 AM   #5
Senior Member
Join Date: May 2005
Location: Home in Casa Grande & Prescott Valley, Az
Posts: 890
So many times I would look at some issue that popped up while the trailer was still under warranty and think, hours or days wasted at the dealer, poor repairs by sometimes unqualified techs, or my time and effort to fix and know what failed, why it failed and how to fix it right. Almost without fail, I fixed the issue myself. Just the thoughts of dealing with dealers was a huge pain all by itself.
Stacey Frank
1999 International 4700LoPro Stalick
2004 Mobile Suites 36TK3 #1341
2008 Lexus 400H
Stripit is offline   Reply With Quote
Old 03-20-2017, 03:38 PM   #6
Junior Member
Join Date: Nov 2015
Posts: 9
Had the same issue with ours. Dealer corrected it by gluing, then nailing the wood trim piece back on.
wonderful wife Robin
2016 DRV 38RSSA
2016 F350 PSD dually
azjeffh is offline   Reply With Quote
Old 03-22-2017, 07:46 AM   #7
Junior Member
Join Date: Jan 2017
Posts: 7
Thanks for your help
2017 38RSSA
2017 Ram Dually
Okieboy is offline   Reply With Quote
Old 04-13-2017, 11:46 PM   #8
Junior Member
Join Date: Oct 2015
Posts: 19
Ours came down also. I pre drilled the wood strip every eight inches. Then bought stainless screens with sunken stainless washers the kind used on boat cabin trim. Can send a pic with your email by phone.
hobo2 is offline   Reply With Quote
Old 03-04-2018, 10:02 PM   #9
Junior Member
Join Date: Aug 2016
Location: Kingman, AZ
Posts: 12
I had the same problem with my 2014, and my 2017 38 RSSA, I just used glue, staples and also ran some screws through the molding. Haven’t had any trouble since.
Good Luck and safe travel.
papaducky is offline   Reply With Quote
Old 03-06-2018, 04:19 PM   #10
Join Date: Mar 2017
Location: San Marcos, TX
Posts: 43
My mirrors has the wooden scroll work and developed some cracks in the wood. I contacted DRV and they sent me two, complete closet doors. They are different than the original wooden scrolls because, according to DRV, early 17's had faulty doors.

2012 F350 KR, LWB, SRW, bilsteins, 1 1/4" anti sway bar, bilstein steering stabilizer, airlift air bags, on board wireless compressor, 295/20 tires at 4080 pounds each, oversized finned aluminum diff and trannie pans, all synthetic fluids, KEM and PIP tunes with SCR4 programming, Edge CTS gauge monitoring.
clev is offline   Reply With Quote

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Virginia State Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 06:26 PM.

Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.