Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-14-2013, 05:55 PM   #1
JOHN EVANS
Senior Member
 
Join Date: Jan 2008
Posts: 114
NEW TRUCK SHOPPING

question ,is anyone towing with a 2013 or 2014 Chevy or Gmc 3500 dually? Did you have any trouble with the new frame heights on these trucks? If you did what was your fix? We are looking at a 2013 Chevy and the bed height is close to 4 inches higher then our 01. Any break control issues between truck and trailer? John and Marlene
38 ft rl3
2001 GMC 3500
DURA MAX
__________________

JOHN EVANS is offline   Reply With Quote
Old 10-15-2013, 10:10 AM   #2
JOHN EVANS
Senior Member
 
Join Date: Jan 2008
Posts: 114
Guess who aint buying a new truck, if the rv needs a lot of stuff done to it just to tow it level 60 k for the truck plus trailer updates. I will shoot for 400 k on my present truck
__________________

JOHN EVANS is offline   Reply With Quote
Old 10-15-2013, 06:02 PM   #3
Joezilla
Senior Member
 
Join Date: Oct 2005
Posts: 163
ha, yep those new trucks are getting up there in $$$$$.

Joe
Joezilla is offline   Reply With Quote
Old 10-15-2013, 08:53 PM   #4
Gemstone
Senior Member
 
Join Date: Jun 2006
Location: Boydton, VA
Posts: 443
Sorry....I can't help myself....ya know you could buy 2, maybe 3 HDT's (used of course) for that money....and you don't have to worry about smashing your bed rails.

Regards
Gemstone
__________________
No longer on the road.
Gemstone is offline   Reply With Quote
Old 10-16-2013, 10:34 AM   #5
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
Been using the same HDT since 04.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 10-16-2013, 02:08 PM   #6
netjam
Senior Member
 
Join Date: May 2011
Location: Canadian on the Road
Posts: 101
John...surprized no GM owner has responded. I have a Ford so I'll tell you what I found last year. I was trading in my 08 F-450 for a 2012 model. I looked at Dodge, Chev & Ford and decided that Dodge was my preference. I measured the box height on all 3500 series and found that the Dodge was 58-59" off the ground, Chev was 57 and the Ford was 54". My trailer rides level at about 52". The Dodge dealer gave me a song and dance about the box settling when loaded but I really didn't believe it would settle 6+". A trailer suspension place quoted $3000 to raise my trailer (properly) so considering everything. I went with the Ford and no modifications. I looked a cab & chassis but they didn't make financial sense and I wasn't into HDTs (but they made sense $ wise) I know people tow suites with new Dodges and Chevies so it must work, but it seemed just too tall for me.
__________________
2012 F-350
2011 Escalade 37RE
netjam is offline   Reply With Quote
Old 10-16-2013, 02:48 PM   #7
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
netmam,
Why did you go to a 350 from the 450--I would have not liked to lose the shorter turning radius?
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 10-16-2013, 02:57 PM   #8
netjam
Senior Member
 
Join Date: May 2011
Location: Canadian on the Road
Posts: 101
Liked the turning radius of the F-450 for sure but the towing capacity of the F-350 in 2012 was better than in 08 and suited my needs for a 15000# trailer. I looked at F-450s in 2012 as well but they were all more money. The 350 just made sense in 2012 whereas the 350 in 08 when towing my 20,000# suite was under capacity. You are right about the turning radius of the 450....I sure miss it.
__________________
2012 F-350
2011 Escalade 37RE
netjam is offline   Reply With Quote
Old 10-16-2013, 03:05 PM   #9
JOHN EVANS
Senior Member
 
Join Date: Jan 2008
Posts: 114
netjam I also looked at a new Ford awesome looking engine.Draw back on Ford is the expense to maintain 2 hrs labor to replace a serptine belt. If a injector or turbo goes the whole nose has to come off to repair $$$$$. The new Doge has increased its towing cap to 30 I understand. Cab and chassie
option on a 3500 is about 7 k for a light weight bed.
JOHN EVANS is offline   Reply With Quote
Old 10-16-2013, 03:17 PM   #10
netjam
Senior Member
 
Join Date: May 2011
Location: Canadian on the Road
Posts: 101
Maintenance can be an issue. That's why I got rid of my 08. An engine rebuild requires that the whole cab comes off. Had 3 rebuilds but all were warranty. It was in the shop for almost a week each time and in 2012 I was beyond warranty so I traded it off. Loved the truck but was afraid of what it might cost me. The 2012 has a different (hopefully less troublesome) motor and way better mileage too.
__________________
2012 F-350
2011 Escalade 37RE
netjam is offline   Reply With Quote
Old 10-17-2013, 09:20 AM   #11
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
Three engine rebuilds in 4 years??????
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 10-17-2013, 09:58 AM   #12
anijet
Senior Member
 
Join Date: Dec 2006
Location: Central California
Posts: 288
2012 GMC here. Very happy with it. Trailer suspension is set to lowest position for highest trailer height. Installed longer shackles that lowered the rear of the truck 1 inch so truck and trailer ride level. Did the trailer adjustment myself for no cost and the shackles were not expensive.

Full disclosure, Later I installed air bags so I could remove the overload springs as an experiment. I like them but they were not necessary.
[/url]
__________________
Leo and Janice
2007 MS 36 TK3 Glide Ride pin box
2012 GMC 3500HD D/A CC 4X4 DRW AirSafe Hitch
anijet is offline   Reply With Quote
Old 10-17-2013, 02:37 PM   #13
GlennWest
Senior Member
 
Join Date: May 2009
Posts: 321
Had no issues getting my coach level with my Silverado. Originally had the dealer install the hitch in lowest position due to what I have read on forums. It was too low. Had to raise it up to next position. The springs are not the standard springs on older trucks. It has more drop than my 05 did but it is due to the springs being progressive. Mine rides level and so does truck. The new trucks ride is superior to the older trucks due to the new springs also. A towing beast I'll add too.
__________________
2006 Mobile Suites 32TK3 SOLD 2003 Teton Grand Freedom, 2006 Freightliner Centry 515 hp Detroit 60 Traveling USA welding pipe
GlennWest is offline   Reply With Quote
Old 10-17-2013, 03:44 PM   #14
JOHN EVANS
Senior Member
 
Join Date: Jan 2008
Posts: 114
Thank you Glenn that's some of the info I have been looking for. Keep welding that pipe!!!
JOHN EVANS is offline   Reply With Quote
Old 10-18-2013, 06:54 AM   #15
Hunter11
Junior Member
 
Join Date: Oct 2013
Location: Central, Tx.
Posts: 8
I have a 2012 Chevy 3500 4X4 DRW CC LWB and we are looking to order a new MS after the first of the year. I am still up in the air about ordering the Mor/Ryde IS suspension as our trailer will be sitting more than traveling. I do intend to order the 2" lift from the factory for the higher bed rails on my truck.
Hunter11 is offline   Reply With Quote
Old 10-18-2013, 07:32 AM   #16
Gemstone
Senior Member
 
Join Date: Jun 2006
Location: Boydton, VA
Posts: 443
"our trailer will be sitting more than traveling"....but you will be traveling. The air suspension is designed to mitigate the jarring on rough roads....we rarely have anything out of place when we arrive at our destination, not so with regular suspension on another brand...even the chairs were strapped to the floor. Even with the air suspension, I do take an extra step and secure the magnetic latch on the medicine cabinet doors...too many times we ended up with a washbowl full of fallout.
I consider the running gear the most important equipment/system on the rig. Remember these rigs may look nice, but they are still assembly line produced, using screws and staples, and IMO, anything that can be done to lessen the road impact will benefit your pocketbook in the long run.

Regards
Gemstone
__________________
No longer on the road.
Gemstone is offline   Reply With Quote
Old 10-18-2013, 09:48 AM   #17
Hunter11
Junior Member
 
Join Date: Oct 2013
Location: Central, Tx.
Posts: 8
Gemstone, I do agree with you and will probably go ahead and get one of the upgraded suspensions offered by DRV. I am leaning towards the Mor/Ryde IS suspension only because to me it looks to be a more simple setup then the air bag system.
Hunter11 is offline   Reply With Quote
Old 10-18-2013, 11:17 AM   #18
hitchup
Senior Member
 
Join Date: Jan 2006
Location: Currently: working on the road
Posts: 770
Quote:
Originally Posted by Hunter11
I have a 2012 Chevy 3500 4X4 DRW CC LWB and we are looking to order a new MS after the first of the year. I am still up in the air about ordering the Mor/Ryde IS suspension as our trailer will be sitting more than traveling. I do intend to order the 2" lift from the factory for the higher bed rails on my truck.
We ordered our 2014 with the M/R IS to see if there's an improvement. Our 36' ES and 38' MS both had TrailAire. We only move a few times a year, but there are some places that just wear us out because of the bad roads.

From what I understand all new Mobile Suites will have the M/R LRE standard and the IS or T-A would be an option, the Elites will have M/R IS as standard.

http://rollingretreats.com/20145productchanges.html
__________________
2014 Mobile Suite Estates 38RSB - custom home
2014 F450 KR CC 4x4 ...... his office
2015 Lance 1172 - traveling Motel (solar and generator)
Working Fulltimers since 3/2005
hitchup is offline   Reply With Quote
Old 10-18-2013, 04:19 PM   #19
GlennWest
Senior Member
 
Join Date: May 2009
Posts: 321
You can but unless you have raise the truck or installed taller tires not necessary. I have over 8" clearance.
__________________
2006 Mobile Suites 32TK3 SOLD 2003 Teton Grand Freedom, 2006 Freightliner Centry 515 hp Detroit 60 Traveling USA welding pipe
GlennWest is offline   Reply With Quote
Old 10-18-2013, 05:47 PM   #20
Hunter11
Junior Member
 
Join Date: Oct 2013
Location: Central, Tx.
Posts: 8
Glenn, that would be great if I don't have to get the 2" risers I had just read about some of the folks on the other DRV forum getting them for the newer trucks. I don't want to hijack this truck post so I will make a different one on the two different suspension options on the MS and which one people prefer.
__________________

Hunter11 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 05:08 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×