Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-04-2018, 12:28 PM   #1
WRWGN
Member
 
WRWGN's Avatar
 
Join Date: Jun 2018
Posts: 31
Tecma Toilet Water Level

Anyone have the Tecma toilet and successfully reprogrammed the water level?


I followed the instructions posted on the lid. I press and hold the two buttons. The bowl empties. I am continuing to hold the buttons. The LED never blinks and eventually the bowl fills to the previous level.


I've tried 3 times. 🤔🤔
__________________

__________________
John & Joyce traveling with Zoie our 18# watchdog
2018 Ford F-450 King Ranch
2019 Mobile Suites 40-KSSB4

10 years full-timing & loving it. Located somewhere in the lower 48
WRWGN is offline   Reply With Quote
Old 09-09-2018, 11:44 PM   #2
Mtntrek
Member
 
Mtntrek's Avatar
 
Join Date: Jul 2016
Location: S. Cali.-MT
Posts: 80
https://www.thetford.com/wp-content/...enceRV-Eng.pdf
__________________

__________________
J&J
DRV Suites ES-38RSSA #9679
GM Denali 3500HD-Max 4x, CC, 8' DRW
EZGo-txt, Yamaha-G22E
Mtntrek is offline   Reply With Quote
Old 09-10-2018, 06:58 PM   #3
SteveandPam
Junior Member
 
Join Date: Jan 2018
Location: Appling, Ga
Posts: 1
I posed this question to the factory last month. I was thinking like you that I could set the water level to my choice. Wrong. When you hold the buttons down, you are setting it to a preset level. The level should be between 1/4" - 1/2" above the opening.
SteveandPam is offline   Reply With Quote
Old 09-11-2018, 04:44 PM   #4
vannchan
Junior Member
 
Join Date: Oct 2017
Posts: 1
My Tecma toilet operates according to the manual. I have adjusted the water level a couple of times. I hold both buttons and the water stops filling when I release them - then after flushing, the water level is where I set it.
vannchan is offline   Reply With Quote
Old 09-11-2018, 05:06 PM   #5
Mtntrek
Member
 
Mtntrek's Avatar
 
Join Date: Jul 2016
Location: S. Cali.-MT
Posts: 80
Quote:
Originally Posted by vannchan View Post
My Tecma toilet operates according to the manual. I have adjusted the water level a couple of times. I hold both buttons and the water stops filling when I release them - then after flushing, the water level is where I set it.
Our experience also.
__________________
J&J
DRV Suites ES-38RSSA #9679
GM Denali 3500HD-Max 4x, CC, 8' DRW
EZGo-txt, Yamaha-G22E
Mtntrek is offline   Reply With Quote
Old 09-13-2018, 05:54 PM   #6
WRWGN
Member
 
WRWGN's Avatar
 
Join Date: Jun 2018
Posts: 31
I've tried the method listed under the toilet lid as well as the process outlined in the manual (they are worded slightly different). Neither work.


When I am in a CG that has lower water pressure, the water level comes up to just under the opening. This is when I try to adjust the level. When in a CG that has better pressure, it is about 1/2" above the opening.


Next week I'll be in my "home" CG for the winter. If the level is not good, I will call customer service.
__________________
John & Joyce traveling with Zoie our 18# watchdog
2018 Ford F-450 King Ranch
2019 Mobile Suites 40-KSSB4

10 years full-timing & loving it. Located somewhere in the lower 48
WRWGN is offline   Reply With Quote
Old 09-14-2018, 10:00 AM   #7
porthole
Senior Member
 
Join Date: Jun 2009
Posts: 133
Best I can tell when you are setting the water level all you are doing is setting the time the solenoid is open.

I have mine set for about 1/4" above using the onboard pump. That way I have the minimum water usage when not on a sewer hookup. I'll either use the water pump or regulate the park pressure down to about the pumps output.
__________________

__________________
Thanks,
Duane
2019 DRV MS 39DBRS3
2011 F-350
porthole is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 08:39 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2018, vBulletin Solutions, Inc.