I got tired of storing my sewer hose in a rubbermaid container so I decided to build an exterior hose holder. The one that DT puts in the side is worthless if you have a hose with connectors. I got four 4" hose hangers from Lowes and modified them a little and then mounted them where the screws already hold the plastic liner to the frame (used longer screws). You could use 4" PVC or ABS. I used ABS because I wanted black pipe. The fittings on the end allow the connectors to go inside, although the connector to the RV end just fits inside the fitting. But that prevents it from going too far inside. I have posted some pictures so you can get an idea of the project. I have used some of the other ideas on this site so I thought I'd share mine. I hope the pictures got attached.
Ron
__________________
Ron and Betty
2004 Mobile Suites 36RS3 #0925
2011 F-350 Lariat Diesel Longbed
Albuquerque, NM
I cant help with the picture posting, but hopefully someone will come along to help you out. At present I have a 4" PVC about 8 ft long attached behind the rear stabilizers and it is working as planned. However I am still interested in seeing your pictures.
__________________
06 MS 36TK3 #2473 w/(Phase II)side to side levelers, Trailair pin box w/Tri-Glide plate.
2011 Dodge 3500 CC 4x4 Diesel DRW Power Tuner guages etc
When you reply to a topic, just add an attachment (photo) in the lower box, filename. You can just drag the jpg to the box or find the attachment.
__________________
Bob and Kate Weigant
Welches Oregon
Elite 2006 36TK3
2007 M2 Freightliner
2005 Wrangler
In a land of the blind, the one eyed guy is king.