Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 08-08-2018, 07:52 PM   #1
NomadicPaul
Junior Member
 
NomadicPaul's Avatar
 
Join Date: Aug 2018
Location: Johnsonville, NY
Posts: 12
Hitch installation question

The truck I have to pull a fifth wheel need a hitch. Currently there is no bed just the frame.

The answer may be obvious to you folks but I am new to all this

I would like to install a flatbed but may not be able to immediately afford it.

Could I have the hitch installed on just the frame?
__________________

NomadicPaul is offline   Reply With Quote
Old 08-09-2018, 07:08 AM   #2
Notanlines
Senior Member
 
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
Most hitch companies use the same "rail" configuration. The two rails that your hitch would drop into would be bolted to the pickup frame. Then the hitch itself just drops into the slots in the rails. It would be even easier for the installer since your pickup bed is gone.....easy access.
__________________

__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
Notanlines is offline   Reply With Quote
Old 08-09-2018, 09:51 AM   #3
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
The underframe parts of a hitch are always installed on the frame--having the bed off makes it simpler for the B&W type hitches and others. Just talk to a hitch shop and ask/confirm what you can put on your truck.
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 08-20-2018, 03:28 PM   #4
HayesCages
Junior Member
 
Join Date: Sep 2016
Posts: 3
Don't know about any other type of hitch but ours is the in-bed rail type and requires the bed to be on the frame to install it. A flatbed wouldn't work with this style for the same reason: they're made for trucks with factory installed beds.
I'd say you'd have to look for one specifically made to mount on the frame only.

Good luck, Lawrence
HayesCages is offline   Reply With Quote
Old 08-20-2018, 05:41 PM   #5
joleyred
Junior Member
 
Join Date: Jun 2016
Posts: 18
Hitch install

It would be a very simple install. It needs to be attached to the frame anyway. The truck bed is only a thin skin, no structural strength for trailer towing purposes. You would have NO issues whatsoever.
joleyred is offline   Reply With Quote
Old 08-20-2018, 06:49 PM   #6
mhbell
Junior Member
 
Join Date: Feb 2018
Posts: 9
Looks to me that you have a couple of options.
If a floor for the hitch rails was needed you could always install a piece of Diamond plate steel between the frame rails of the truck. another possibility would be to install a goose neck hitch and pin box. That could be a better option if you are going to install a flat bed. That way the hitch would be hidden when you were not towing. No rails in the flat bed that way and more room for stuff when towing.
__________________
2016 Cougar 1/2 ton series 277RLSWE towed with 2011 ford F250 XL Super Duty Super Cab, 4WD, Tow Pkg, 6.2L Flex Fuel. My Blog: RV Bloggers
mhbell is offline   Reply With Quote
Old 08-20-2018, 07:12 PM   #7
HayesCages
Junior Member
 
Join Date: Sep 2016
Posts: 3
The only hitch that would be suitable for the "frame only" application would be the B&W (under bed mounting) mentioned above. Just my 2 cents
HayesCages is offline   Reply With Quote
Old 08-20-2018, 07:26 PM   #8
mhbell
Junior Member
 
Join Date: Feb 2018
Posts: 9
Quote:
Originally Posted by HayesCages View Post
The only hitch that would be suitable for the "frame only" application would be the B&W (under bed mounting) mentioned above. Just my 2 cents
My Reese 16K hitch has plates that are underneth and run along the side of the frame and the rails attach to it, the rails of the hitch are in the bed of the truck but could be setting on a Diamond plate of steel would not matter as the truck bed is thin metal. see link below for picture.

__________________
2016 Cougar 1/2 ton series 277RLSWE towed with 2011 ford F250 XL Super Duty Super Cab, 4WD, Tow Pkg, 6.2L Flex Fuel. My Blog: RV Bloggers
mhbell is offline   Reply With Quote
Old 08-20-2018, 11:11 PM   #9
Notanlines
Senior Member
 
Join Date: Oct 2017
Location: Germantown, Tennessee
Posts: 716
Bum info has been sent out. Believe me when I say Bell and Joley are absolutely correct. Read my first post. Install away!
__________________
Jim and DW 50 years Brenda
2018 40rssa and 2021 Jayco Eagle 40'
2019 F450, ruby red
Harley Road King & sidecar
Notanlines is offline   Reply With Quote
Old 08-21-2018, 12:31 AM   #10
Mtntrek
Member
 
Mtntrek's Avatar
 
Join Date: Jul 2016
Location: S. Cali.-MT
Posts: 80
Quote:
Originally Posted by Notanlines View Post
Bum info has been sent out. Believe me when I say Bell and Joley are absolutely correct. Read my first post. Install away!
Agreed.
At best the bed is only sandwiched between the frame components and the traditional rails. Often not even properly.

In a puck mount system none of the components even touch the bed. The pucks mounted to the frame protrude through hole-sawed openings.
__________________

__________________
J&J
DRV Suites ES-38RSSA #9679
GM Denali 3500HD-Max 4x, CC, 8' DRW
EZGo-txt, Yamaha-G22E
Mtntrek is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 02:56 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×