Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-12-2007, 02:34 PM   #1
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
Entry steps & how they could be improved

What are folks doing about the worst designed part of just about ALL trailers?
The door entry steps work, but on a scale of 1 to 10 I rate these steps at 5 at best.
Every time I reach for the door handle I have to do this awkward backwards lean.
Standing on that lower step and opening the door is just plain goofy!

So, what have the "bright fellaz" done to remedy this poor design.

I think it's time to don my thinking cap, and widen, and broaden that lower step.
Like a platform, so that there is room to actually swing open the door with-out having to do an awkward balancing act.

Thoughts....
Rick
__________________

__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 06-12-2007, 03:16 PM   #2
JudyGail
Senior Member
 
Join Date: Jun 2006
Location: Salt Lake City, Utah
Posts: 148
Send a message via ICQ to JudyGail
We bought the Dean's Deck porch. Works like a charm.
__________________

__________________
Judy Gail
MobileSuites '06 36TK3 #3151
Fulltimer Aug. '06, Hit the Road Sept. '07
JudyGail is offline   Reply With Quote
Old 06-12-2007, 04:20 PM   #3
2 DA WDS
Senior Member
 
Join Date: Jun 2005
Location: Illinois
Posts: 527
Porch

Newmar 5ers had a 'porch' that would slide out and then the steps would fold down. Something like that OR a door handle at the bottom of the door on the outside like road tractors have. But their doors are hollow.
__________________
Happy Trails To You
Tom & Cheryl Brockman S.O.I.T.C. Charter Member
2015 39DBRS3, Truma water heater, 2inch lift, custom paint
2011 RAM Cummins 3500 Dually
2 DA WDS is offline   Reply With Quote
Old 06-13-2007, 01:22 PM   #4
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
Thanks for your responses.
I decided to build my own version of the Extenda-step idea.
Have a look here:


It works as I had hoped....
No more leaning backward holding onto th door while opening it!

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 06-13-2007, 01:36 PM   #5
bstark
Senior Member
 
Join Date: May 2005
Location: Fergus, Ontario, CANADA
Posts: 1,000
Rick: A great idea! Even room to set the 24 on end while you open the door. Haaar!

Nicely built with height adjustment and undo 4 screws to pack it away. Well done. Patent it quick or the next thing you know you'll start seeing them in parks with "KWIKEE" labels on them.
__________________
Sandra, Bruce
bstark is offline   Reply With Quote
Old 06-13-2007, 03:12 PM   #6
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
Thanks! I appreciate the compliments!

I have no intention of marketing my simple solution....just happy to have it.

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 06-13-2007, 03:46 PM   #7
Hobo
Senior Member
 
Join Date: May 2005
Location: Always on the Road
Posts: 558
Quote:
Originally Posted by Diesel-Gypsy
Thanks! I appreciate the compliments!

I have no intention of marketing my simple solution....just happy to have it.

Rick
Rick, I'm a bit confused. On the 12th you posted

Quote:
Originally Posted by Diesel-Gypsy
I think it's time to don my thinking cap, and widen, and broaden that lower step.
Like a platform, so that there is room to actually swing open the door with-out having to do an awkward balancing act.
less then 24 hours you have a finished product. Plus your Web Shots say the pictures were taken a week before the original post.

It is a good idea just don't know why you presented it as you did.
__________________
Rick & Maggi
03 2500 Chev Der-max
Lemon Tree 04 MS 36TK3 #0886
Hughes Net
Fulltimer since 1999
Find me at https://map.datastormusers.com/user1.cfm?user=2000
Hobo is offline   Reply With Quote
Old 06-13-2007, 04:12 PM   #8
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
Hobo, not sure about the dates on my camera, as I never reset them...
It could show any date...no difference to me.
I only posted those shots an hour after I took them, so I have no idea why that date is off.....
I built it today....
That's my story, and I'm stickin to it...!

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 06-13-2007, 06:22 PM   #9
Hobo
Senior Member
 
Join Date: May 2005
Location: Always on the Road
Posts: 558
You do good work,, and fast too. When are you going to start taking orders Bring a couple with you when you head South this Fall...
__________________
Rick & Maggi
03 2500 Chev Der-max
Lemon Tree 04 MS 36TK3 #0886
Hughes Net
Fulltimer since 1999
Find me at https://map.datastormusers.com/user1.cfm?user=2000
Hobo is offline   Reply With Quote
Old 06-14-2007, 09:09 AM   #10
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
Hobo....I'm not sure about bringing any of these extenda-steps anywhere, just not interested in making any more of them.....although if a good friend asked me I might give in.
It took me 4 hours to build it.
I started my lay-out on Tuesday night, cut some pieces then as well.
Wednesday morning I finished the leg assemblys and mig-ed it all together.
I gave it a quick coat of black lacquer, dry in 1/2 hour.
Total time 4 hours.

I think there is a three hour time difference between where I am, and the sites location, so as I posted my pics at a little after 2:00pm here, it shows-up as a little after 11:00am on the site.

I'm not sure about your original comments about when the pics were taken and posted on my Web-Shots.
When I look there, it clearly shows the pics being posted on June 13th. not a week before as you say...
It also says the pics were taken (camera) on January 05, 2003.
As I said I never reset the date on my camera.

So, like I said, it took 4 hours to build, and yes around 24 hours passed between me asking what others were doing about the step problem, and me finishing-up what I thought was a clever solution.

I think many guys here are capable of 4 hours of work in a 24 hour period......What do you think....?

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 06-14-2007, 10:49 AM   #11
Hobo
Senior Member
 
Join Date: May 2005
Location: Always on the Road
Posts: 558
Quote:
Originally Posted by Diesel-Gypsy
Hobo....I'm not sure about bringing any of these extenda-steps anywhere, just not interested in making any more of them.....although if a good friend asked me I might give in.
It took me 4 hours to build it.

I think many guys here are capable of 4 hours of work in a 24 hour period......What do you think....?

Rick
We maybe capable of 4Hr work but, I try not too.
I mis-read the Web Shot dates, I guess that is what added to my already confused mind.

Bottom line, it a very good, professional looking job. If my DW were to see it I'm sure she would be putting me to work.

Rick H
__________________
Rick & Maggi
03 2500 Chev Der-max
Lemon Tree 04 MS 36TK3 #0886
Hughes Net
Fulltimer since 1999
Find me at https://map.datastormusers.com/user1.cfm?user=2000
Hobo is offline   Reply With Quote
Old 06-15-2007, 05:20 AM   #12
WildJohn
Member
 
Join Date: Jun 2005
Posts: 62
although I see the obvious advantages to your design, (i wuld like to see a pic with it closed thugh) My neighbor used a technique that I liked so well I copied it on my next day off... and since then My DW and I have not had the knee pain we have experienced for the last year of full timing.. didn't make the relationship until the pain was gone suddenly..
I can take some pics and post them but here is the short story.. Went to LOWES and bought two five step risers/stringers, and some 5/4 decking material, a 24" square piece of 3/4" exterior plywood, and a box of deck screws... I had them cut the decking into 2' lengths. I screwed the decking on the vertical portion of the risers first and then screwed on the tread surfaces.. leaned them up against the extended original steps and adjusted them until the top step of my new staricase was even with the top step of the origiinal and screwed the plywood to the tread. then I took two of the pieces of decking and stood then on edge perpindicular to the length of the RV and slid them on top of the second step and screwed them to the riser. The height was a little off so I put a pallot on the ground and screwed the bottom of the risers to it and covered it with steping stones, it makes a little porch at the bottom and the 2'x2' plywood on the top makes a pretty neat little platform too.. With a little paint it will look pretty good and feels great. Now I need to get home and get a length of wrought iron railing I know I have lying around. total cost less than fifty dollars and less than an hour to assemble...
When we move I can take the four toenail screws out at the bottom and slide it off the foldable steps and it will go through the door to ride just inside I hope.. haven't tried but it measures out ok..
The reason for the knee pain became obvious once I started to measure.. check out the carpenter's standard rise for stairs and measure ours... one and a half times standard is enough to kill your knees.
happy camping
John
__________________
2005 38RL3
Custom Volvo 610 (the ANGEL)
pressure pro
gearmaster
backup cams
3KW Honda
6V battery bank w/inverters
WildJohn is offline   Reply With Quote
Old 06-15-2007, 08:29 AM   #13
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
John, I did not build my "Extenda-Step" as a permanent addition.
My step takes 1 minute to install, and is only put in place once I set-up the trailer.

So there is no need for me to take a pic of it in the closed position, there is no such positon.
When travelling it breaks down basically flat, so storage is easy.

Your idea is a good one for sure. If I understand your solution you have a platform at the top step position as well as at the bottom step....is that correct?
I guess a picture is worth 1000 words!

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 06-15-2007, 07:28 PM   #14
OB
Member
 
Join Date: Dec 2005
Location: Pensacola, Fl
Posts: 49
Gee Rick; I just checked and Sue and I stand flat footed and easily reach the key hole. (hehehe)
__________________
97 Dodge 3500 DRW 4 by 4
04 36TK3 #1207 w/5th airborne pin hitch
OB is offline   Reply With Quote
Old 06-15-2007, 09:46 PM   #15
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
..laugh it up big fella...!
I know, you have no such problems, but Not EVERYONE is 6 foot 8

At least my shower is not as cramped as yours.....

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 06-16-2007, 04:09 AM   #16
WildJohn
Member
 
Join Date: Jun 2005
Posts: 62
Diesel-Gypsy,
You are right. there are two platforms, one pallot sized and one small one at the top. It is a little narrow but usable since it will fit through the door easily.

I thought maybe your fine addition was capable of covering the ugly steps. I always thought that is an eye sore on our good looking RVs... they should be able to make a cover for them that also doubles as a platform like yours.. I am too far from my home shop to do much experimenting but maybe some day. Maybe a cover that folds down to allow the steps to fold out.
Happy camping,
John
__________________
2005 38RL3
Custom Volvo 610 (the ANGEL)
pressure pro
gearmaster
backup cams
3KW Honda
6V battery bank w/inverters
WildJohn is offline   Reply With Quote
Old 06-16-2007, 08:55 AM   #17
Diesel-Gypsy
Senior Member
 
Join Date: Mar 2007
Location: Qc. Canada
Posts: 206
John, just where are you located these days?
Any chance you could make it north to our mini-rally?

Rick
__________________
2007 Carriage ROYALS INTERNATIONAL MONARCH 38
no truck yet…but looking
Diesel-Gypsy is offline   Reply With Quote
Old 06-17-2007, 12:19 PM   #18
WildJohn
Member
 
Join Date: Jun 2005
Posts: 62
We are in Central Illinois. until October then on to warmer climates.
__________________
2005 38RL3
Custom Volvo 610 (the ANGEL)
pressure pro
gearmaster
backup cams
3KW Honda
6V battery bank w/inverters
WildJohn is offline   Reply With Quote
Old 06-21-2007, 12:42 AM   #19
2 DA WDS
Senior Member
 
Join Date: Jun 2005
Location: Illinois
Posts: 527
Quote:
Originally Posted by WildJohn
We are in Central Illinois. until October then on to warmer climates.
I tried to send you a couple of PMs but I dont think they made it.

'Where at in central Illinois? We are about 15 miles north of Springfield.'
__________________
Happy Trails To You
Tom & Cheryl Brockman S.O.I.T.C. Charter Member
2015 39DBRS3, Truma water heater, 2inch lift, custom paint
2011 RAM Cummins 3500 Dually
2 DA WDS is offline   Reply With Quote
Old 06-21-2007, 10:08 PM   #20
ebrowne826
Junior Member
 
Join Date: Nov 2005
Location: Austin, Texas for now
Posts: 14
Steps

Go to sunriservproducts.com and check out
their porch. I've got one and it works great.
I even put a gate on it for our dog. Picked it
up at Home Depot. It takes about 20 to 30 min's
to assemble and I carry it in a duffle bag.
__________________

__________________
2005 Mobile Suites 36TK3
Unit #2346
2005 Ford F-350 6.0 Turbo Diesel
Austin, Texas
ebrowne826 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 04:01 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×