Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 02-21-2011, 06:31 PM   #1
BobW
Senior Member
 
Join Date: May 2006
Location: Welches Oregon
Posts: 523
bike rack receiver

Anyone added a receiver to their 5th wheel DRV? I would like to add a double bike rack on the back, but, I don't want a ladder rack. Where do I start?
__________________

__________________
Bob and Kate Weigant
Welches Oregon
Elite 2006 36TK3
2007 M2 Freightliner
2005 Wrangler
In a land of the blind, the one eyed guy is king.
BobW is offline   Reply With Quote
Old 02-21-2011, 09:28 PM   #2
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
We had our dealer install one for us. Took half a day & did not cost much. Don't remember how much. Just told him what it was for, bikes, not cars or trailers.
__________________

porkchop is offline   Reply With Quote
Old 02-22-2011, 04:41 AM   #3
Cheif 2
Member
 
Join Date: Aug 2010
Location: Salt Springs, Florida
Posts: 89
We had one added at the factory as part of the original purchase. It is bolted to the frame. Keep in mind the bikes get real dirty back there and you may find that you will need to add a riser to give the bikes more clearance when traveling through angled drives.
__________________
2007 38Rl3 MS
2005 Chevy 3500 4x4 5" Exhaust, Edge Attitude Tuner, Airaid Intake, Air Bags, Rancho Shocks, Hellwig Big Wig Sway Bar
Cheif 2 is offline   Reply With Quote
Old 02-22-2011, 06:36 AM   #4
jas24
Member
 
Join Date: Aug 2009
Location: way down here, FL
Posts: 70
bike rack

Hi Bob,

I have the hitch, brand new mounting brackets and brand new bike rack I might be interested in selling.
The mounting brackets get welded to the frame.
__________________
Jack

06 F-350 Lariat 4x4 V-10 CC SRW LB
06 Mobile Suites 36CK3
jas24 is offline   Reply With Quote
Old 02-22-2011, 11:56 AM   #5
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
I had one installed by the DRV factory as an option I ordered with the trailer. Very very bad idea. The hitch was never welded properly. It was held on by small "spot" welds with no penetration to the metal of the hitch or frame. It was held only by welding rod slag. The hitch also hung down below the rear of the trailer a good 4" to 5" and self removed itself when it contacted a sloping driveway exiting to the street. It then relocated itself into the rear cap.

DRV made good on the repairs only after I drove back to the factory more than 1200 miles with the hitch and threatened legal action. I kept the hitch and brought it with us. The inferior quality of the welds was painfully obvious and the folks at Charger helped to convince DRV that they were on the wrong side of the issue. That happened during the 2 year factory warranty that DRV no longer offers.

If you do use a bike hitch, keep in mind the bike(s) will be on a long arm that will be swinging on every bump. That flexing can lead to failure of the hitch, bike mount and damage to the trailer or another vehicle if it separates onto the roadway. That has happened and since it's on the back of the trailer you will probably never notice it until you stop and do a walk around.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 02-22-2011, 09:02 PM   #6
porkchop
Senior Member
 
Join Date: Sep 2010
Location: Nebraska
Posts: 382
Bob-If all you want it for is bikes, bolt it on. No need to weld. Easier, cheaper. Get a carrier where the wheels sit in the wells, not hang by the bars or frame. Better set up and not at all wobbly. I've had mine for almost 3 years with out a bit of trouble or concern

Bill
porkchop is offline   Reply With Quote
Old 02-23-2011, 09:45 PM   #7
Beachgirl
Member
 
Join Date: Jun 2010
Posts: 57
Ok, totally newbie question. :)

Since the MS has a 2" receiver, would a hitch rack be best, and avoid all the welding problems?

And Bob recommended one w/ wheel wells, so I checked Amazon and found this:

http://www.amazon.com/Swagman-Cross-...518517&sr=8-26
Attached Images
File Type: jpg bike_rack_102.jpg (16.1 KB, 187 views)
Beachgirl is offline   Reply With Quote
Old 02-24-2011, 04:13 AM   #8
Cheif 2
Member
 
Join Date: Aug 2010
Location: Salt Springs, Florida
Posts: 89
That is similar to the type I have, except mine holds two bikes. It has held up well and is easy to use. The bikes stay very secure on it.
__________________
2007 38Rl3 MS
2005 Chevy 3500 4x4 5" Exhaust, Edge Attitude Tuner, Airaid Intake, Air Bags, Rancho Shocks, Hellwig Big Wig Sway Bar
Cheif 2 is offline   Reply With Quote
Old 02-24-2011, 01:00 PM   #9
missourijan
Senior Member
 
Join Date: May 2006
Location: Tucson, AZ
Posts: 131
We had a receiver added at the factory, bad mistake. Very rough ride back there, our bike rack broke at the "L" and bikes fell off. We were very lucky not to have caused an accident. Will never have anything back there again. We had a machinist make one for the king pin and really like it.
__________________
Jan & Thomas
2012 Mobile Suite #5942
2012 Ford F350 Super duty
"We used to work, now we workamp"
missourijan is offline   Reply With Quote
Old 02-24-2011, 09:32 PM   #10
tajmahaulers
Junior Member
 
Join Date: Feb 2011
Posts: 2
We had added a receiver on the back of our last fifth wheel and carried our bikes there with no problem. We traded for a an '06 MS TK3 and it didn't look good for a receiver on the back because of the spare tire. Another MS owner suggested we add a receiver to the front of the truck. Camping World can order them and install them, too. We haven't travelled with the bikes in front yet but I've seen others on the road. Seems like a good solution to me.
tajmahaulers is offline   Reply With Quote
Old 02-25-2011, 10:22 AM   #11
The View 5046
Senior Member
 
Join Date: Feb 2010
Location: Linden, Tennesse
Posts: 167
If you have the bikes that the front tires are quick disconnect. Its very easy to remove the front tires and roll them into the basement. We have always stored our bikes in the Basement a 26" and a 27". But we had the option of the 2.5" receiver on our 2010 MS and I can assure you if Drv did the same job in mounting the receiver it will handle bikes. Our receiver handles a lot more than a couple hundred pounds. They are rated at 3,000 lbs and it will do that....
__________________
2012 Chevy 3500HD DRW's LTZ (SOLD

2010 Mobile Suites 38 RSSB 4 (SOLD)
Trailer Saver TS 3
Pressure Pro System (SOLD)
The View 5046 is offline   Reply With Quote
Old 04-23-2011, 08:41 PM   #12
David Schwertner
Junior Member
 
Join Date: Jun 2010
Posts: 26
Bicycle Rack

Any one try mounting a front mounted receiver hitch on the front end of your towing pickup to haul your bicycles? It mounts to the truck frame. I looked at Curt # 31008. I've seen some rv'ers doing that before.

Looks better than having a hitch on the back end of our Mobile Suites. They had a swagman 2- bike rack. Easy way to keep an eye out on your bikes too while going down the road.
Any Ideas?
I have an F450, so weight won't be a problem.
__________________
David and Shirley Schwertner
Lubbock,Texas
2008 36 TK3
2008 Ford F450
David Schwertner is offline   Reply With Quote
Old 04-24-2011, 01:16 PM   #13
BobW
Senior Member
 
Join Date: May 2006
Location: Welches Oregon
Posts: 523
Re: Bicycle Rack

Quote:
Originally Posted by David Schwertner
Any one try mounting a front mounted receiver hitch on the front end of your towing pickup to haul your bicycles? It mounts to the truck frame. I looked at Curt # 31008. I've seen some rv'ers doing that before.
.
I wonder if this is legal? I think the bike would cover up the turn and head lights and possibility restrict the air going to the radiator. Just a thought. I gave up and added a receiver to the back of our RV. Years ago we had a ladder bike rack. The rack broke and the bikes fell half way to the ground. It also broke the ladder and grounded half my bike wheel off before I saw it. The ladders are cheep and can't hold the weight.
__________________
Bob and Kate Weigant
Welches Oregon
Elite 2006 36TK3
2007 M2 Freightliner
2005 Wrangler
In a land of the blind, the one eyed guy is king.
BobW is offline   Reply With Quote
Old 04-24-2011, 04:39 PM   #14
edt
Junior Member
 
Join Date: Jan 2006
Posts: 25
Send a message via AIM to edt
I put one on the front of our truck no problem even easy to install, Love Bugs were added at no charge
Attached Images
File Type: jpg img_1461__small__755.jpg (45.5 KB, 63 views)
__________________
2004 36CK3
2007 GMC 3500 Dudley
edt is offline   Reply With Quote
Old 04-24-2011, 05:57 PM   #15
wingnut60
Site Team
 
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
You can get a hitch that mounts on the tow hooks on the front--appears pretty solid, as the Ford hooks are heck for stout.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
wingnut60 is offline   Reply With Quote
Old 04-25-2011, 05:06 PM   #16
David Schwertner
Junior Member
 
Join Date: Jun 2010
Posts: 26
Bike Rack Receiver Installed

Just had a front mounted receiver hitch mounted on my F450 to carry two bikes. Went with the Curt Mfg. #31008; as it has a #500 lb tongue capacity. Two bikes won't even come close to that wt. Great install with no modifications needed. Hitch bolted directly to the frame. Two bolts on each side. Twenty minutes and I was on my way. Discount Hitch Inc. out of Austin,Texas.
__________________

__________________
David and Shirley Schwertner
Lubbock,Texas
2008 36 TK3
2008 Ford F450
David Schwertner is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 12:08 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×