Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 05-11-2005, 06:31 PM   #1
boondocker
Junior Member
 
Join Date: May 2005
Posts: 15
Slideout Lube

I thought about using grease but whoudnt the dirt & grime stick to it from gravel roads? My owners manual doesn't say anything at all about maintenance on the slide.
Would silicone spray be enough of a lube?
__________________

boondocker is offline   Reply With Quote
Old 05-11-2005, 11:51 PM   #2
seattlefirervr
Junior Member
 
Join Date: May 2005
Location: Snohomish, WA
Posts: 3
asked the same question in another forum and the "spray can" type lubricant seemed to be the most popular answer. do stay away from the traditional grease
__________________

__________________
2006 Wildcat 31' QBh
2000 F-250 CC,SB,PSD
seattlefirervr is offline   Reply With Quote
Old 05-11-2005, 11:52 PM   #3
seattlefirervr
Junior Member
 
Join Date: May 2005
Location: Snohomish, WA
Posts: 3
asked the same question in another forum and the "spray can" type lubricant seemed to be the most popular answer. do stay away from the traditional grease
__________________
2006 Wildcat 31' QBh
2000 F-250 CC,SB,PSD
seattlefirervr is offline   Reply With Quote
Old 05-12-2005, 07:05 AM   #4
rverdlm
Senior Member
 
Join Date: May 2005
Location: On the road
Posts: 1,063
Check your owners manual. Some say no lube.
__________________
Dave & Barbara
KenWorth T2000
2005 Mobile Suites 38RL3 #2338
MorRyde IS 8K axles, LazyBoy recliners, LCD tv
Full time since '96
rverdlm is offline   Reply With Quote
Old 05-12-2005, 08:28 AM   #5
Scot
Junior Member
 
Join Date: May 2005
Location: Maryland
Posts: 16
Send a message via Yahoo to Scot
On my rig, when the slides are IN, the rails and mechanisms are not exposed so I would think that using a good grease should work just fine..
__________________
2005 Everest 343L
2004 Chevy 2500HD D/A CC SB
Hidden Hitch 18k w/prodigy
https://community.webshots.com/user/sarobins113
Scot is offline   Reply With Quote
Old 05-12-2005, 11:22 AM   #6
Badge
Junior Member
 
Join Date: May 2005
Location: San Clemente
Posts: 18
I would highly recommend a dry Teflon lube. You spray it on and after a few minutes it dries to a white film. Using any kind of moist grease will attract dirt and dust. I guarantee you will have dirty grease in a matter of days on the road. I use Teflon on my slide gears and arms. Every few months I wipe it down and put on a new coat. I have never had any problems or squeaks.

Happy Camping!
Badge
__________________
2002 35' HitchHiker Champagne, 2002 Chevy 2500HD Duramax LT,5 Speed Allison, CC, LB, Line-X,Inflatable w/4hp motor,Tekonsha Prodigy, Firestone Ride Rite, Transfer Flow Midship Tank, ttt-mirrors, Garmin V, Roto Chocks, Reese 20K
Badge is offline   Reply With Quote
Old 05-16-2005, 08:03 PM   #7
crunch1
Senior Member
 
Join Date: May 2005
Location: Ohio
Posts: 118
My friends and I use a silicone spray about once a month . Seems to work well, and we use it on our seals around the slideout also. I tend to think that the grease will pick up a lot of dirt also.
Just my 2 cents worth,
crunch1
__________________
Mobile Suites 36RE3
crunch1 is offline   Reply With Quote
Old 05-24-2005, 04:39 PM   #8
Brushy
Junior Member
 
Join Date: May 2005
Location: Albuquerque, NM
Posts: 7
My RV dealer recommends silicone spray only.
__________________
Art Briggs
2002 Chevy 2500HD 8.1L/Allison
2005 Excel 33RKO Limited
Brushy is offline   Reply With Quote
Old 05-25-2005, 01:18 PM   #9
bamspringtx
Junior Member
 
Join Date: May 2005
Posts: 6
I use "slide lube" that I got from the dealer, keeps it quiet. Cost about $10, lasts awhile. Also use it on the rear stab jacks and door steps.
__________________
'03 F350 7.3 PSD CC SRW 4x4 Lariat 315/75/16 Nitto's. Overhead mounted Isspro's. SCV mod, Fumoto valve.
'04 Wildcat 31QBH
'99 Astro 2050FS
My pics
bamspringtx is offline   Reply With Quote
Old 06-01-2005, 09:04 PM   #10
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
I use a plain old wax candle to rub a thin coating of parafin in the slide mechanism. It stays on pretty well and doesn't collect grit.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 05-06-2009, 09:33 AM   #11
Blynch
Junior Member
 
Join Date: May 2009
Posts: 2
slides will come out

2003 ceader creek i can not get my big slide to come out HELPPPPP
Blynch is offline   Reply With Quote
Old 05-07-2009, 09:07 AM   #12
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
You are going to have to post much more than that to get help. Is the motor running when you push the button? Does part of the slide start to come out but the other end remain stationary? Does it work when you manually crank the slide?
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 05-07-2009, 10:58 AM   #13
Blynch
Junior Member
 
Join Date: May 2009
Posts: 2
It has 3 slides the bedroom works but the other two do not. Nothing happens at all when trying to open the main and oppsing room. Trying to figure out how to manually pull them out (any Ideas would help). It has fluid in it i am thinking it might have air in the lines. gonna try to bleed them.
Blynch is offline   Reply With Quote
Old 05-08-2009, 09:12 AM   #14
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
It is impossible to diagnose this without all the info. In this post you indicate it's a hydraulic system. That is new information you left out earlier.

What brand and model trailer do you have?

Is the hydraulic fluid topped off?

What happens when you push the button on the inoperative slide? Does the pump run at all? If it does run, does the pump sound like there is a load on the pump or is it free spinning with no load. In other words does the pump sound different on the 2 inoperative rooms than the functional one?

Have you checked the hydraulic manifold, hoses and rams for leaks?

If you have a mobile suites trailer, there are knurled knobs on the hydraulic manifold. All of the knob should be turned counter clockwise as far as they will go.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 02-04-2010, 04:50 PM   #15
rockyman
Junior Member
 
Join Date: Jan 2010
Posts: 23
has anyone tried using "Triflo", its sold in of all places sewing shops, it goes on wet and dries to a film. I have used it on all kinds of applications but was unsure is I should use it on my slide rails?
__________________

rockyman is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 03:39 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×