Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 10-20-2015, 10:30 PM   #1
pterrydactyl
Member
 
Join Date: Sep 2015
Posts: 82
Fiver insulation

First posting. Have decided to remove the underbelly barrier todo some work . I need to replace the sewer valve and while I'm at it I want to add some insulation underneath. Any suggestions how to secure the insulation board?

Also the heat duct is ill fitting and leaks so bad that little heat enters the bedroom. The storage area get HOT.
Where2 part come together one part buckles in opening a big gap. I thiught I would add some double stick foam tape and then screw or pop rivet them together.

Any other suggestions or comments appreciated.
__________________

pterrydactyl is offline   Reply With Quote
Old 10-21-2015, 08:06 AM   #2
billr
Senior Member
 
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
When I did work inside the underbelly, replaced the insulation with pink fiberglass.

The belly panels come open at the edges and I just make access openings where needed like a drop down door of sorts that stays attached at inside edge. I use strips of thin plywood to place on the seems and then screw along both seems. Using metal self drilling screw then along frame edge along with the U trip thats already there. Seal seems with sealant.

Never an issue. Works fine for me.
__________________

__________________
Bill and Joan
4 Collie pups
05 M/S 38RL3 #2046
01 Volvo VNL770
05 Smart Passion Loaded piggyback
https://picasaweb.google.com/billandjoan
Weigh-It Portable RV Scales
https://www.weighitrv.com
billr is offline   Reply With Quote
Old 10-25-2015, 10:45 PM   #3
pterrydactyl
Member
 
Join Date: Sep 2015
Posts: 82
Billr- thanks for the reply. That's about what I had in mind to do. I was thinking if installing thick styrofoam-like insulation especially on the underside of the flooring. Would glue and thin metal strips work out?
The ducting is so agap that I can reach up and put my hand inside. So, I was thinking if removing the duct and closing the chasm with double stick foam tape. I would use sheet metal screws or pop rivets to close the chasm. Any comments any one?
pterrydactyl is offline   Reply With Quote
Old 10-26-2015, 12:35 PM   #4
billr
Senior Member
 
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
What ever seems to work on the ductwork. Mine has been ok but lots have the same issue. A friend spent winters in AZ fixing those for folks.
__________________
Bill and Joan
4 Collie pups
05 M/S 38RL3 #2046
01 Volvo VNL770
05 Smart Passion Loaded piggyback
https://picasaweb.google.com/billandjoan
Weigh-It Portable RV Scales
https://www.weighitrv.com
billr is offline   Reply With Quote
Old 10-26-2015, 12:47 PM   #5
pterrydactyl
Member
 
Join Date: Sep 2015
Posts: 82
I'll be in Bullhead City, is he still around(BIG GRIN)?
Thanks for the reply. I think I have my hands full.
pterrydactyl is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 02:10 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×