Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 06-10-2020, 12:55 PM   #1
Padgman
Junior Member
 
Join Date: Jun 2020
Location: Tennessee
Posts: 7
Battery Charger Question

Last year I had an issue with the batteries and thought they were old and just replaced them. The camper is always hooked to shore power when not on the road. Well the batteries went dead again. I removed the less than year old batteries, filled them with distilled water, and charged them back to 100%. When I hooked them back up I checked the voltage and I am getting 13.2 VDC using a Fluke Meter. The Positive lead from the trailer connected and the Negative lead disconnected, I checked for power from the Battery Charger and I am only getting 10.8 VDC. I am assuming this is a Battery Charger issue, but looking for advice. The rig is a 2012 Keystone Alpine. Any advice would be appreciated.
Padgman is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 09:00 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×