Bad workmanship

[BobW]

Our lower drawer under the fridge was not staying closed. I pulled the drawer out and found the roller on the slide about to come off. Only 3 screws hold the hole thing together. Also the drawer slides were connected to a flat piece of plywood. The plywood was screwed to the back with one toenailed screw. Looks like a six year old put this together. Also behind the plywood was two electrical boxes. Nobody would ever know they were there unless they took the plywood off. Really bad workmanship. The plywood doesn't need to be tall enough to reach to the top. Just screw a 2x4 to the bottom to connect the slides to. Then you'll have access to the boxes. On the back of the drawer they used those little black door locks that I've gone through a dozen of. It broke and that was why the drawer wouldn't stay closed. :?