Notices

Reply
 
Thread Tools Search this Thread Display Modes
 
Old 01-13-2019, 02:10 PM   #11
whmayhew
Member
 
whmayhew's Avatar
 
Join Date: Sep 2017
Posts: 37
Bought 2 sets of bearings, wheel seals and lock for $45.98 from randpcarriages on ebay. Now I just need the axle nuts, don't know what size they are.
__________________

whmayhew is offline   Reply With Quote
Old 01-14-2019, 10:45 AM   #12
Cummins12V98
Senior Member
 
Join Date: Feb 2013
Location: on the road
Posts: 587
Quote:
Originally Posted by whmayhew View Post
Bought 2 sets of bearings, wheel seals and lock for $45.98 from randpcarriages on ebay. Now I just need the axle nuts, don't know what size they are.
Why would you need new nuts?
__________________

__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's

2016 MS 39TKSB3 "Highly Elited"
Cummins12V98 is offline   Reply With Quote
Old 01-14-2019, 10:47 AM   #13
Cummins12V98
Senior Member
 
Join Date: Feb 2013
Location: on the road
Posts: 587
Quote:
Originally Posted by whmayhew View Post
Cummins12V98 what did you weld on your spring perch?

I taped the caliper to the spring if that is what you are referring to?

The bearing had shifted in rotor/hub and was rubbing on caliper bracket and got HOT so I put a 1 1/8" pc of plywood between the pads.
__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's

2016 MS 39TKSB3 "Highly Elited"
Cummins12V98 is offline   Reply With Quote
Old 01-14-2019, 04:37 PM   #14
whmayhew
Member
 
whmayhew's Avatar
 
Join Date: Sep 2017
Posts: 37
Quote:
Originally Posted by Cummins12V98 View Post
Why would you need new nuts?
I have seen pictures of the damage that happens when you lose a wheel bearing. Just want spares, just in case.
whmayhew is offline   Reply With Quote
Old 01-14-2019, 05:22 PM   #15
grafton guns
Junior Member
 
Join Date: Feb 2018
Posts: 11
whmahew, Do you mean an skf B36 bearing? I could go into a technical discussion about the C3 bearing fitments etc. but if you go to SKF's website you can get all the technical jargon on that bearing........
__________________
2017 Jayco Eagle HT 27.5 RLTS
2016 Ford F-350 crew cab Lariat 6.2L
grafton guns is offline   Reply With Quote
Old 01-15-2019, 06:03 PM   #16
MTK46
Senior Member
 
Join Date: Dec 2018
Location: Desert Hot Springs Ca.
Posts: 161
Here is a site for the 7000 lbs axle seal kit
https://www.ebay.com/itm/Trailer-Bea...:rk:2:razz:f:0
__________________
Mike & Trish Romans 10:9
2011 Mobile Suites 36RSSB3 #5556
2014 F-350 CC 6.7 diesel dully
MTK46 is offline   Reply With Quote
Old 01-21-2019, 04:38 PM   #17
grafton guns
Junior Member
 
Join Date: Feb 2018
Posts: 11
Never heard of an sks bearing. Are you sure it is not an SKF bearing. Anyway. The B in the bearing description means it has a "B" clearance between the roller/balls and race. B and C are the most common and B clearance bearings are popular for axle bearings etc. although there are others. You stated SKSB36 but there should be additional numbers after the 36** usually 4 numbers total.
__________________
2017 Jayco Eagle HT 27.5 RLTS
2016 Ford F-350 crew cab Lariat 6.2L
grafton guns is offline   Reply With Quote
Old 01-21-2019, 07:25 PM   #18
Jack in Alaska
Senior Member
 
Join Date: Jun 2005
Location: Anchorage & Ninilchik, Alaska
Posts: 291
it is too (not to) cold up here..........
__________________
2012 Jayco 40FER Bungalow TT
2004.5 Dodge 3500 DRW 4x4 Quadcab CTD 325/600 6 spd 3.73 HiJacker Hitch;Access bed cover; Prodigy; PacBrake; DZ boards;air horns;Westach combo gauge;Sirius;Smarty Jr, Lite Force road lites
Yamaha iSEB 3000 genset

Start Out Each Day Real Easy.......Then Taper Off
Jack in Alaska is offline   Reply With Quote
Old 01-21-2019, 07:29 PM   #19
Jack in Alaska
Senior Member
 
Join Date: Jun 2005
Location: Anchorage & Ninilchik, Alaska
Posts: 291
it is brake (not break) pads..........
__________________
2012 Jayco 40FER Bungalow TT
2004.5 Dodge 3500 DRW 4x4 Quadcab CTD 325/600 6 spd 3.73 HiJacker Hitch;Access bed cover; Prodigy; PacBrake; DZ boards;air horns;Westach combo gauge;Sirius;Smarty Jr, Lite Force road lites
Yamaha iSEB 3000 genset

Start Out Each Day Real Easy.......Then Taper Off
Jack in Alaska is offline   Reply With Quote
Old 01-23-2019, 12:00 PM   #20
Cummins12V98
Senior Member
 
Join Date: Feb 2013
Location: on the road
Posts: 587
Quote:
Originally Posted by Jack in Alaska View Post
it is brake (not break) pads..........

I have seen them BREAK
__________________

__________________
2015 RAM LongHorn Dually Air ride Aisin 4:10's

2016 MS 39TKSB3 "Highly Elited"
Cummins12V98 is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 02:39 AM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2019, vBulletin Solutions, Inc.