Journey with Confidence RV GPS App RV Trip Planner RV LIFE Campground Reviews RV Maintenance Take a Speed Test Free 7 Day Trial ×
 
 


Reply
 
Thread Tools Search this Thread Display Modes
 
Old 09-20-2009, 09:17 AM   #1
morscuba
Senior Member
 
Join Date: Sep 2007
Posts: 124
Bedroom slideout leaking.

Since I've had the MS, when traveling (slideout in) I have had a leak that runs down the slideout and makes a fairly good size puddle on the floor. When hooked up and running front has about a + 1 to 2 degree up angle. Last night parked (slideout out) front was at about a -2 to 3 degree angle down. Good hard rain and it looks like someone turned on the hose and let it run. Carpet on just the slideout is soaked. The wall does not appear to be wet by look or touch. I got up there and the seals (APPEAR) to be in place and sealing. Was wondering if anyone else has had that problem and what they did to correct it. I do know that had I been level it wouldn't have been as bad but nothing I could do about it last night.
Thanks for any input.
Sam
__________________

__________________
2008 MS 4212 2007 Freightliner M2 MountainMaster..2012 Victory Cross Country behind the cab. 2011 Honda Fit pushing the FL and the MS
morscuba is offline   Reply With Quote
Old 09-20-2009, 09:38 AM   #2
billr
Senior Member
 
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
Check the rubber seals on the exterior on the lower corners, I had one turned in and was tracking water inside past the wiper seals. Compared to the fwd corner it was differnt.

Stopped my flood.

Another problem can be the window leaking on the glass seals and the frame. may have to pull it out to see.

Bill
__________________

__________________
Bill and Joan
4 Collie pups
05 M/S 38RL3 #2046
01 Volvo VNL770
05 Smart Passion Loaded piggyback
https://picasaweb.google.com/billandjoan
Weigh-It Portable RV Scales
https://www.weighitrv.com
billr is offline   Reply With Quote
Old 09-20-2009, 10:22 AM   #3
morscuba
Senior Member
 
Join Date: Sep 2007
Posts: 124
Thanks Bill
At first I thought it was the seal as the inside was not tight against the wall. I moved the slideout in and water poured from the frame of the slide out. So I am assuming the water came from the window seal. Guess that will be my next project.
thanks again
Sam
__________________
2008 MS 4212 2007 Freightliner M2 MountainMaster..2012 Victory Cross Country behind the cab. 2011 Honda Fit pushing the FL and the MS
morscuba is offline   Reply With Quote
Old 09-20-2009, 11:10 AM   #4
keithandpenne
Senior Member
 
Join Date: Jul 2005
Posts: 292
You might check for debris in the window track. When the window is up, it is open to the outside. Anything under it will prevent it from sealing and could allow water to enter.
__________________
Keith and Penne
Fulltimers - 2005
2005 36TK3 #1855
2008 F450 CC Lariat
keithandpenne is offline   Reply With Quote
Old 09-20-2009, 08:15 PM   #5
BobW
Senior Member
 
Join Date: May 2006
Location: Welches Oregon
Posts: 523
Run a strip of duct tape to seal the wipers. Then spray it with a hose. That will get you an idea where the leak is.
__________________
Bob and Kate Weigant
Welches Oregon
Elite 2006 36TK3
2007 M2 Freightliner
2005 Wrangler
In a land of the blind, the one eyed guy is king.
BobW is offline   Reply With Quote
Old 09-21-2009, 08:35 AM   #6
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
We had a bedroom leak as well when the slide was out. It turned out the lower wiper seal was the culprit. There was a sizable gap where it met the side wiper seals. When we had the factory repairs done they re did the wiper seal all around the slide out. That stopped the leak. There is no inside bulb seal on any of our slide outs. The wiper seal is all there is.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 09-21-2009, 11:31 AM   #7
rdunk
Senior Member
 
Join Date: Jun 2005
Location: Texas
Posts: 482
I just had a leak last week, and it was obvious the water was coming in under the wooden window ledge on the rear window of the B/R slide. I assumed it was a window seal problem, and bought silicon caulk before looking at it.

Well, I got the ladder out, and found that only the top of the window was caulked to begin with, and I could see some areas of the side window seal were not making tight contact with the window wall. So, I re-caulked around the top and sides of the window, and so far, with some serious rain, NO WATER COMING IN!!!
__________________
Robert

Robert and Carlene

2005 RE3, S/N 2107 (sold Jan. 2010)
rdunk is offline   Reply With Quote
Old 09-22-2009, 09:27 AM   #8
Motor31
Senior Member
 
Join Date: May 2005
Posts: 2,130
Robert,

That is the same situation I found on our rig. Not one of the windows or hatches had been caulked other than the top edge. Most had not even been caulked to the curved portion of the top edge. I spent a nice afternoon sealing every opening in the rig. I still have one window that will leak if a heavy rain is falling directly onto it. I guess I'll have to pull it to see why.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
Motor31 is offline   Reply With Quote
Old 09-27-2009, 10:13 PM   #9
RodeWorthy
Senior Member
 
Join Date: Oct 2005
Location: Woodstock, Ontario
Posts: 370
Bedroom slide still leaking

I thought I had this problem solved but inspection today after a rainfall showed we are again getting water onto the carpet between the bed and the rear wall of the br slide. It is enough water to soak the carpet and run under the bed frame and collect on the shelf at the rear of the underbed storage.

Previously we had this window caulked all around. We can see no evidence of water running down the inside wall -- it must be running down inside the wall. No problem when the slide is in.

I think I am going to have to pull the window to see if I can detect the path of the leak. I got a tip one time suggesting weatherstripping be glued to the roof of the slide on an angle to channel the water away from the lowpoint corners. Have not tried this yet but it may have some merit. Also considering wide Eternabond on the metal strip at the top.

Sam, have you had any success locating the source of leaks on yours?
__________________
RodeWorthy

'07 Mobile Suites 36RS3 #3910
Mor/ryde IS, Trailersaver TS3 hitch
Level-Up with Remote Control
4 x 135W Solar Panels, Outback Controller, 4 x 6V batteries, Xantrex Inverter/Charger
'08 Chevy 3500 dually Duramax/Allison
RodeWorthy is offline   Reply With Quote
Old 09-28-2009, 04:04 PM   #10
morscuba
Senior Member
 
Join Date: Sep 2007
Posts: 124
I "Think" Mike had the solution at least for me. I use the term think because I have not had a hard rain since I had the problem. It turned out to be the lower wiper seal, the hard rubber gasket that goes over the channel. It takes a 32" seal/gasket and mine was about 1/2 inch short. A new gasket is being sent by Herr but in the mean time I stuffed a plastic sandwich bag in the gap and covered it with silicone.. If your gasket is long enough I would coat with a thin coat of silicone where it meets the sill.
Good luck
Sam
__________________

__________________
2008 MS 4212 2007 Freightliner M2 MountainMaster..2012 Victory Cross Country behind the cab. 2011 Honda Fit pushing the FL and the MS
morscuba is offline   Reply With Quote
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump

» Featured Campgrounds

Reviews provided by

Powered by vBadvanced CMPS v3.2.3

All times are GMT -5. The time now is 03:46 PM.


Powered by vBulletin® Version 3.8.8 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×