|
01-22-2015, 10:08 AM
|
#1
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Washer/Dryer--new flooring
Being as this forum has some of the owners with older Suites, and I have seen posts on at least the flooring work--but I can never get a search to come up with just what I am looking for.
Any brands/model numbers on new W/D would be very helpful, and a link to discussions of flooring projects appreciated.
Thanks,
Joe
__________________
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
01-23-2015, 07:44 AM
|
#2
|
Senior Member
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
|
We still have original flooring, sorry...but we have had W/D for several years. Whirlpool front load washer and separate 110Vdryer. They work well. They came from Sears. DW loves them! I worried about the 110V dryer but its fine. Needs to be outside vent though.
Once and a while the washer pump inlet gets plugged with hair (3 collies, and I keep telling my DW not to wash them in there!) easy to clean out once and a while from lower front pull off cover and a plug comes out. Found a dime in it once too. ha
Dryer LDR3822 PQ1
Washer WFC7500VW1
I have seen same models in many units at recent RV show.
__________________
|
|
|
01-23-2015, 07:46 AM
|
#3
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Bill,
Thank you for the model numbers--makes it a lot easier for a sales clerk to look them up--most aren't aware of the 110volt stuff.
We have the same hair problems when we wash the Yorkies...
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
01-23-2015, 09:00 AM
|
#4
|
Senior Member
Join Date: May 2007
Location: West Bend, Wisconsin
Posts: 397
|
We have a 2008 MS TK3. We had all our flooring (carpet & linoleum) replaced two years ago. Holding up very well, much better than the OEM flooring.
We've been wintering in the RGV in TX for the last 4 winters. They came right to our site and did the complete floor replacement in one day.
|
|
|
01-23-2015, 06:42 PM
|
#5
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Have heard of the RGV floor work--do you have a name/number for them?
Thanks,
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
01-23-2015, 07:25 PM
|
#6
|
Senior Member
Join Date: May 2007
Location: West Bend, Wisconsin
Posts: 397
|
The name of the business is "All About Floors" and the phone number is 956-463-2484.
|
|
|
01-24-2015, 10:26 AM
|
#7
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
Many thanks.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
01-28-2015, 02:09 PM
|
#8
|
Senior Member
Join Date: Jun 2006
Location: Boydton, VA
Posts: 443
|
"We have the same hair problems when we wash the Yorkies..."...
ya put the Yorkies in the washer ???
We have had the Whirlpool separates since the rig was new, had the dealer install them...still doing fine.
"Found a dime in it once too"....a dime jammed in the washer pump cost me $200 once...
Regards
Gemstone
__________________
No longer on the road.
|
|
|
01-28-2015, 06:08 PM
|
#9
|
Site Team
Join Date: Sep 2005
Location: Where we park it
Posts: 2,838
|
"ya put the Yorkies in the washer ???
Yep, they are so small, all 3 fit in the same load. We do air-dry them, tho.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|
|
|
01-29-2015, 07:47 AM
|
#10
|
Senior Member
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
|
Quote:
Originally Posted by Gemstone
"We have the same hair problems when we wash the Yorkies..."...
ya put the Yorkies in the washer ???
We have had the Whirlpool separates since the rig was new, had the dealer install them...still doing fine.
"Found a dime in it once too"....a dime jammed in the washer pump cost me $200 once...
Regards
Gemstone
|
We also had a dime get stuck in the little pump inlet just a few weeks ago. The machine throws a code A10 that is outlet pump flow low, pulling that plug and cleaning it out clears it up. Its not fun if you can't get the water to empty......but fixable. Plastic bag and towels!! ha
I have a spare pump now but never needed it after I worked out how to clear the issues. Now I check it when its MT once and a while. Pump was about $60 online if I remember right. The first time I had the washer out and upside down and all apart. Yikes!
Bill
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|