View Single Post
Old 01-06-2019, 09:02 AM   #6
OCB
Member
 
Join Date: Jun 2018
Posts: 99
Quote:
Originally Posted by EricHarmon View Post
At the Knoxville RV show today,

Are you still in Knoxville? if so try to get a weight of your new RV before leaving the area. What is most important is the pin weight. I think you will be OK with your shorter 36 RSSB3 but for my 2016 MS 38PS3 (Actually almost 41 feet long) PIN weight is 25% of the loaded 20,000 weight.



Yes take your time inspecting your unit. When we picked up our RV early Dec 2015, we did the the two nights on the lot and two nights at a RV park. It was the next 1,000 miles that we found other things. Problems which you don't normally look for like the black waste pipe under the Kitchen Sink not be glued at all joints. Or where abundance of staples were used that surface as walk about in your bare feet.

Yes, We like the owners and staff at RV's for Less and would buy there again but to many hidden things. Look for the big things like do the slides work smoothly and seals (do the seals block the daylight)?

Clay
OCB is offline   Reply With Quote