|
After non-success with Technical Support, I wrote Greg: "Sorry for your wait Eric. The wedges are put on as alignment blocks to center the slide box in the opening when closing, also to help cut down or eliminate side to side movement of box while traveling. As long as the room is closing good and sealing, I would not see a great concern to add them at this time. Hope this helps! "
Wingnut, I asked for the part number, but that question was not answered. I've followed up and will let you know the results. As well, on checking the other slides, there are no sheared off bolts, or empty bolt holes.
Based on Greg's response, one has to ask the question: Is the only time the wedges are factory installed, is when the slide is not closing good, is not sealing, OR when it is projected there to be too much side-to-side movement of the box, when moving ? But I did not ask those questions. I don't want to be a trouble maker.
|