Years ago when my pull handle was very hard to pull i tried to spray a lube down the cable. Might have helped a tad, but was still a bugger. So crawled under and removed the cover for access to the attaching point to the valve and straighten out the cable. Found it was easy to operate, so ran the cable a differnt direction, changed the loop the factory installed to run around, and then reattached. Fixed the hard pull. You might have a different issue? Valve could be sticky?
__________________
2013 Tiffin Allegro 34 QFA
2015 Cadillac SRX (towed)
2019 Tesla Model X
1991 Avanti Conv
|