5thWheelForums.com - View Single Post - Installing Pressure Pro on aluminum wheels

golf_bears · 12-19-2008, 06:50 PM

You may want to try putting Teflon tape on the valve stem threads. I recently had luck with trying that out on my TPMS sensors which were leaking.

Just don't try tightening them down too much or you could strip out some threads.

12-19-2008, 06:50 PM	#4
golf_bears Senior Member Join Date: May 2007 Location: West Bend, Wisconsin Posts: 397	You may want to try putting Teflon tape on the valve stem threads. I recently had luck with trying that out on my TPMS sensors which were leaking. Just don't try tightening them down too much or you could strip out some threads.