View Single Post
Old 05-27-2007, 12:03 PM   #2
billr
Senior Member
 
Join Date: Jan 2006
Location: Ontario Canada
Posts: 857
The genny prep box is quite a bit bigger than what mine ended up being for the Honda 3000. It does come with all the elec connections and safety disconnect so you can hook up the Honda direct (plug adaptor to the wired box) and you can get a remote start for it and use it from inside. I don't have all that without the genny prep, just plug in my trailer cord to the Honda.

The box is just sitting in the compartment, so making it smaller may be an option once you get it home.

The slider if from Quickie Slide. The install required raising the floor height about 3/4" so the slider cleared the lower door opening, also had to extend the slider mounts aft to reach a main beam for mounting. Added some alluminum angle under floor for support where there is nothing but plywood. All in all not too hard to do.

Cheers,
Bill
__________________
Bill and Joan
4 Collie pups
05 M/S 38RL3 #2046
01 Volvo VNL770
05 Smart Passion Loaded piggyback
https://picasaweb.google.com/billandjoan
Weigh-It Portable RV Scales
https://www.weighitrv.com
billr is offline   Reply With Quote