Well, I took a clean, but more complex approach. I bought a 32 inch LCD Panasonic that was an almost perfect fit to the TV shelf, without most of the stand.
I then took the back off of the TV and removed the stand and replaced it with two angle irons that I drilled with holes so that I could screw them into the holes into which the stand screwed. I replaced the back.
The angle irons were then bolted to the cabinet shelf. The angle irons were further braced with a diagonal member.
This is a very clean installation but took a few hours to accomplish.
I will be at my TK3 tomorow and will take a few pictures and post them.
|