5thWheelForums.com - View Single Post

RickandJanice · 10-09-2012, 07:41 PM

Had same issue with same switch a couple of year into owing our rig. Found the actual wire crimp on the connectors at the switch were loose. Connectors fit tight on the switch but the loose crimp was causing too much resistance and the switch got hot. After tightening the crimp, have not had any other issues.

10-09-2012, 07:41 PM	#8
RickandJanice Senior Member Join Date: Jul 2009 Posts: 119	Had same issue with same switch a couple of year into owing our rig. Found the actual wire crimp on the connectors at the switch were loose. Connectors fit tight on the switch but the loose crimp was causing too much resistance and the switch got hot. After tightening the crimp, have not had any other issues. __________________ Rick and Janice Binns 2006 MS 32TK3, Mor/Ryde Pin Box and I.S., Auto Level-Up 2012 Ford F450 6.7 L Diesel, air bags and 25K Reese Signature hitch (factory installed)