5thWheelForums.com - View Single Post

47hook · 05-25-2010, 09:20 AM

For those who can do without the sliding bar shower head here is all I had to do: open pantry door, remove 2 small screws and remove access panel, remove 2 water lines with my fingers, remove 2 plastic nuts holding on the shower controls, remove same from inside shower. Once I get the replacement I will reverse procedure to install. Very simple. Only tool needed is a screw driver.

05-25-2010, 09:20 AM	#5
47hook Senior Member Join Date: Jan 2007 Posts: 158	For those who can do without the sliding bar shower head here is all I had to do: open pantry door, remove 2 small screws and remove access panel, remove 2 water lines with my fingers, remove 2 plastic nuts holding on the shower controls, remove same from inside shower. Once I get the replacement I will reverse procedure to install. Very simple. Only tool needed is a screw driver. __________________ Olympic Peninsula, WA 2008 3500HD LTZ CC 4X4 Duramax/Allison /Banks IQ / Economind tuner / SpeedBrake 2013 MS 38RESB3 #6393, modified with ES stuff & Garnet Paint "The older I get, the better I was!"