[mloftin]

O.K. The Winegard Travler is now installed, no pic's yet but will try and take some this weekend. What I wound up doing with the control wire was bringing it through the vent pipe into the bathroom area and then I cut a small hole in the pantry over the toliel at the top so I could cut a hole in the ceiling to the left of the pantry. Then I ran the control cable into the closet by the entry door and mounted the control box above the switch for the owning. I bought a panel mount (SKA-850) from Winegard/Camping World which allowed me to flush mount the control box. I had to run a seperate power source for the control box which I tied into the hot water switch and ran it into the area behind the control box, I have not had any issues with pulling power from the hw switch since the control box has very little amp draw.