Quote:
|
Originally Posted by RonS
David - This is now I level. First side to side runing up the low side of trailer on boards, then use something on wheels so trailer does not roll. Then raise up the front of trailer and unhook the truck. After truck is clear level the trailer from front to back, with the front landing gear, I put the pin in the 5th hole from the bottom both sides. Then the rear stabilizer, just enough to stabilize, dont try to lift the trailer. Then run out the slides with the bed room slide last.
|
That would be the correct sequence.
level side to side and chock tire
Lift off truck and level front to back
put down rear stabilizers
extend slides
Reverse order to hitch back up