|
David - This is now I level. First side to side runing up the low side of trailer on boards, then use something on wheels so trailer does not roll. Then raise up the front of trailer and unhook the truck. After truck is clear level the trailer from front to back, with the front landing gear, I put the pin in the 5th hole from the bottom both sides. Then the rear stabilizer, just enough to stabilize, dont try to lift the trailer. Then run out the slides with the bed room slide last.
__________________
06 MS 36TK3 #2473 w/(Phase II)side to side levelers, Trailair pin box w/Tri-Glide plate.
2011 Dodge 3500 CC 4x4 Diesel DRW Power Tuner guages etc
|