5thWheelForums.com - View Single Post

bstark · 12-25-2011, 04:42 PM

Bill; that is the repair and mod I performed within the first year of owning my 38'er. I may have mentioned to you that I removed that aluminum piece that was already worn badly and replaced it with a piece of steel angle that was 3" X 5" so that the five inch part was down and the part the little duplex rollers rode against to support the inner weight of the slideout.

I used that part of the angle to lay the drain hose on and fastened it to the upper side of that to keep it from being continuously dragged over the 'sharp cornered' roller end brackets.

12-25-2011, 04:42 PM	#33
bstark Senior Member Join Date: May 2005 Location: Fergus, Ontario, CANADA Posts: 1,000	Bill; that is the repair and mod I performed within the first year of owning my 38'er. I may have mentioned to you that I removed that aluminum piece that was already worn badly and replaced it with a piece of steel angle that was 3" X 5" so that the five inch part was down and the part the little duplex rollers rode against to support the inner weight of the slideout. I used that part of the angle to lay the drain hose on and fastened it to the upper side of that to keep it from being continuously dragged over the 'sharp cornered' roller end brackets. __________________ Sandra, Bruce