Quote:
|
Originally Posted by porkchop
Mine is apparently different than yours. Went out and looked. All rams have 2 lines to them.
Bill
|
All of our rams have two lines also. Have never heard of a hydraulic ram that operates on suction. The only hydraulic systems I ever worked with that used one line were those used in gas and oil pressure control systems. These type systems only need one line as the pressure on the back side on the ram will push the ram in reverse when the pump pressure is released and the fluid will flow back out the same line to the reservoir.
__________________
Rick and Janice Binns
2006 MS 32TK3, Mor/Ryde Pin Box and I.S., Auto Level-Up
2012 Ford F450 6.7 L Diesel, air bags and 25K Reese Signature hitch (factory installed)
|