5thWheelForums.com - View Single Post

47hook · 01-05-2010, 07:38 PM

Or whatever the voltage is. Problem is this:
When the unit was less than a year old the switch for the ceiling fan failed; it would just flop back and forth. You could make the fan work if you pushed real hard on the switch but would not stay on if you took the pressure away. DRV sent me a new switch and it is still ok.
Now, the light switch by the entrance door for the overhead sink lights is doing the same thing. These are kind of strange light switches: a line in and a line out. Question is can I use a regular house dimmer switch?
Thanks in advance.

01-05-2010, 07:38 PM	#1
47hook Senior Member Join Date: Jan 2007 Posts: 158	110 Volt Light Switches Or whatever the voltage is. Problem is this: When the unit was less than a year old the switch for the ceiling fan failed; it would just flop back and forth. You could make the fan work if you pushed real hard on the switch but would not stay on if you took the pressure away. DRV sent me a new switch and it is still ok. Now, the light switch by the entrance door for the overhead sink lights is doing the same thing. These are kind of strange light switches: a line in and a line out. Question is can I use a regular house dimmer switch? Thanks in advance. __________________ Olympic Peninsula, WA 2008 3500HD LTZ CC 4X4 Duramax/Allison /Banks IQ / Economind tuner / SpeedBrake 2013 MS 38RESB3 #6393, modified with ES stuff & Garnet Paint "The older I get, the better I was!"