[RodeWorthy]

Bill there are two ways I know of to keep the ball valve open on the Concerto electric flush toilet. If you remove the lid at the back of the toilet you will notice a rod sticking up. Pushing that down will cause a manual flush. It would be a good idea to pull the fuse before trying this.

The other way requires two people but it involves pulling the fuse but holding it against the fuse holder while your helper initiates a flush. When the ball opens you can pull the fuse away from the holder to stop the action. Replacing the fuse will cause the cycle to complete and the ball will close.

I actually prefer the second option. The rod seems to be tricky and the rotating parts on the flush valve are finely adjusted and sensitive.

On my unit the fuse was not marked but my Concerto was an add-on, not standard as in your Elite. Trial and error found the right fuse. Hope this helps.