5thWheelForums.com - View Single Post

Motor31 · 04-06-2008, 10:10 AM

Bob,

I was checking and going to adjust the level of the door when I saw the entire rail assembly was sagging and coming loose from the roof of the trailer. Using the adjustments was no good as it was going to pull out of the roof entirely. All of the weight of the door is held by the aluminum rail in the roof and that is held in by a few screws. In our case it was too few screws and they were also too short for the job.

04-06-2008, 10:10 AM	#3
Motor31 Senior Member Join Date: May 2005 Posts: 2,130	Bob, I was checking and going to adjust the level of the door when I saw the entire rail assembly was sagging and coming loose from the roof of the trailer. Using the adjustments was no good as it was going to pull out of the roof entirely. All of the weight of the door is held by the aluminum rail in the roof and that is held in by a few screws. In our case it was too few screws and they were also too short for the job. __________________ Mike Nancy and the fuzzies Fulltiming since June 2004 Volvo 660 MH tow vehicle 2005 MS 38RL 2007 Saturn Ion "toad" 2010 Gold Wing "piggyback"