5thWheelForums.com - View Single Post

clev · 12-02-2018, 08:27 AM

You are correct, friz, the gooseneck is an adapter to 'adapt' a ball mount instead of the pin. But, as previously stated, that alone 'may' not be good for your frame. The warranty is usually only a year, but the frame is the life of the unit. The Mor-Ryde adapter plate 'adapts' the g/n to the pin with special mounts to minimize the stress. Here's a link, hope it works:
http://www.morryde.com/products/72-g...rubber-pin-box

12-02-2018, 08:27 AM	#18
clev Senior Member Join Date: Mar 2017 Location: San Marcos, TX Posts: 295	You are correct, friz, the gooseneck is an adapter to 'adapt' a ball mount instead of the pin. But, as previously stated, that alone 'may' not be good for your frame. The warranty is usually only a year, but the frame is the life of the unit. The Mor-Ryde adapter plate 'adapts' the g/n to the pin with special mounts to minimize the stress. Here's a link, hope it works: http://www.morryde.com/products/72-g...rubber-pin-box __________________ '17 36RSSB3///2012 F350 KR, LWB/SRW, Bilsteins, antisway bar, Bilstein steering stabilizer, Airlift air bags, wireless compressor, 295/20 tires at 4080 pounds each, oversized finned aluminum diff and trannie pans, synthetic fluid, KEM, PIP, & Tyrant tunes w/SCR4 programming, Edge CTS gauge monitoring, G37 2017 turbo, ATS Stage I transmission.