Quote:
Originally Posted by terry and jo
Jim,
I'm posting a picture below of our basement area. In the photo, look to the center right and behind the sliding door. You'll see a piece of plywood that has a number of components mounted on it. The square box you see is the transfer switch that is at the very end of the plywood. When our Progressive Industries unit was installed, Slade mounted it near that square box. Then it is close to the closet inside where he mounted the remote display.
I wasn't there to watch when he was installing the PI system, so he might have moved some of the other components on the plywood to the side to make room for the main unit.
 |
Thanks, Terry, but it looks like the Tradition 375KPS has its transfer switch way up in the driver side battery compartment, in the "ceiling" of the compartment, above the vented battery box, where access for an amateur like me would be very difficult.
Dan showed me the location of the transfer switch yesterday when I asked about the "Gen prep" arrangement.
Jim G