[rjohnsonnm]

I got tired of storing my sewer hose in a rubbermaid container so I decided to build an exterior hose holder. The one that DT puts in the side is worthless if you have a hose with connectors. I got four 4" hose hangers from Lowes and modified them a little and then mounted them where the screws already hold the plastic liner to the frame (used longer screws). You could use 4" PVC or ABS. I used ABS because I wanted black pipe. The fittings on the end allow the connectors to go inside, although the connector to the RV end just fits inside the fitting. But that prevents it from going too far inside. I have posted some pictures so you can get an idea of the project. I have used some of the other ideas on this site so I thought I'd share mine. I hope the pictures got attached.
Ron