5thWheelForums.com - View Single Post - Level-Up

47hook · 06-02-2011, 01:25 PM

Had our LevelUp installed at Trailair a couple of years ago now; I believe after Lippert had purchased them. Have 3 switches that control the system and must use levels to get the rig level. The system (and the Lippert frame/slides - oops, on edit did have one slide ram replaced because of debris in the hyd system the first year of ownership) have worked flawlessly. After unhooking the rig I use both the door side and off door side switches at the same time to raise and lower unit and get close to the final height, then use individual switches to level. Works great.

Rotaxman, not sure why the Lippert frame would preclude using the Big Foot system but I do hope you have a chance to get your LevelUp system working to your satisfaction...

06-02-2011, 01:25 PM	#10
47hook Senior Member Join Date: Jan 2007 Posts: 158	Had our LevelUp installed at Trailair a couple of years ago now; I believe after Lippert had purchased them. Have 3 switches that control the system and must use levels to get the rig level. The system (and the Lippert frame/slides - oops, on edit did have one slide ram replaced because of debris in the hyd system the first year of ownership) have worked flawlessly. After unhooking the rig I use both the door side and off door side switches at the same time to raise and lower unit and get close to the final height, then use individual switches to level. Works great. Rotaxman, not sure why the Lippert frame would preclude using the Big Foot system but I do hope you have a chance to get your LevelUp system working to your satisfaction... __________________ Olympic Peninsula, WA 2008 3500HD LTZ CC 4X4 Duramax/Allison /Banks IQ / Economind tuner / SpeedBrake 2013 MS 38RESB3 #6393, modified with ES stuff & Garnet Paint "The older I get, the better I was!"