|
One of the problems with these removable side plates is that if you lower the pinbox one hole the side plate has to be lowered as well, since there are fewer holes. IF try and use the side plate it will be one hole lower then the pin pin box was moved and you will have a 1" between the top of the plate and the bottom of the overhang.
On my list of things to do is contact DRV and/or Lippert to see if plates are available with the holes punched in alternate location.
An alternative would be to get side plates prior to punching and have them done locally.
__________________
Thanks,
Duane
2019 DRV MS 39DBRS3 ---> Flexible Flyer
2020 F-450
|