5thWheelForums.com - View Single Post - Is the bedroom drawer unit in the 36SB3 the same as others?

Red Ram · 08-22-2007, 10:33 AM

On our SB3, the drawer set up is lacking support on the left end. They said they could not put a bracket on the left side because there was no room for one beacuse of the drawer on the left end. When you pull the drawer unit out, it comes out crooked and binds up because on no support on the left side.

I am going to try to get them to send me one of the slider hangers and I think I can make it work by fabricating an angle iron bracket on the wall. This would not be in conflict with the left hand drawer and should provide the support that it needs.

Yes I agree.........Poor design

08-22-2007, 10:33 AM	#5
Red Ram Member Join Date: Jul 2007 Location: Oregon Posts: 73	On our SB3, the drawer set up is lacking support on the left end. They said they could not put a bracket on the left side because there was no room for one beacuse of the drawer on the left end. When you pull the drawer unit out, it comes out crooked and binds up because on no support on the left side. I am going to try to get them to send me one of the slider hangers and I think I can make it work by fabricating an angle iron bracket on the wall. This would not be in conflict with the left hand drawer and should provide the support that it needs. Yes I agree.........Poor design __________________ 1997 U320 Foretravel 40ft Ron & Donna