Quote:
Originally Posted by Mtntrek
Not exactly sure what you mean?
We ordered the cam's. The rear facing cam is wireless, powered by the trailer clearance light(s) circuit which is common. The side view cams are wired through a separate loom through basement via tongue / pinhead to a 7-pin umbilical socket on the underside of the nose cap (near docking lamp). Wiring the truck portion was our responsibility. They are patched into the same approx 8" console mounted panel. Powered by TV.
With a little better fore thought, the whole setup would make a nice in coach CCTV security panel. Discreetly powering the rear cam, a second wiring harness into the electrical closet, then just move the viewing panel from the TV to the coach. Oh well too soon old, too late wise. Hard to know what mfrs. are going to do.
We have some IPCam's we use with our router and smart devices for security.
|
So to make your backup cam work you have to have your running lights on?