5thWheelForums.com - View Single Post

Cummins12V98 · 01-03-2016, 01:30 PM

The bedroom slide of that era is a challenge to get working properly. For one the bracket that is visible outside that is lag bolted to the bottom of the slide has been upgraded and would be a good start replacing it. DRV can send you one. Both sides of the slide are controlled by hydraulic rams and can be a bugger to get adjusted. I can't tell you how to do it. If you are mechanically inclined just dig in if not I am sure someone can recommend a good shop to help.

The suggestion to check for something wedged is a good one. I would look at next to the bed at the front of the slide.

01-03-2016, 01:30 PM	#6
Cummins12V98 Senior Member Join Date: Feb 2013 Location: on the road Posts: 1,188	The bedroom slide of that era is a challenge to get working properly. For one the bracket that is visible outside that is lag bolted to the bottom of the slide has been upgraded and would be a good start replacing it. DRV can send you one. Both sides of the slide are controlled by hydraulic rams and can be a bugger to get adjusted. I can't tell you how to do it. If you are mechanically inclined just dig in if not I am sure someone can recommend a good shop to help. The suggestion to check for something wedged is a good one. I would look at next to the bed at the front of the slide. __________________ 2015 RAM LongHorn Dually Air ride Aisin 4:10's 2016 MS 39TKSB3 "Highly Elited"