5thWheelForums.com - View Single Post

RodeWorthy · 08-22-2008, 03:15 PM

I finally got around to installing new batteries (4 AA) in the LVL-1 Wireless Digital Level sending unit. It had reported incorrect leveling requirements and a check revealed the batteries had reached a low level.

I was surprised to find that the sending unit has apparently held its calibration even though the batteries had been removed for several days.

Those of you who have changed the batteries. Did the unit hold calibration or did you have to reset it after installing new batteries?

08-22-2008, 03:15 PM	#7
RodeWorthy Senior Member Join Date: Oct 2005 Location: Woodstock, Ontario Posts: 370	JT's LVL-1 Digital Level Kept Calibration Without Batteries I finally got around to installing new batteries (4 AA) in the LVL-1 Wireless Digital Level sending unit. It had reported incorrect leveling requirements and a check revealed the batteries had reached a low level. I was surprised to find that the sending unit has apparently held its calibration even though the batteries had been removed for several days. Those of you who have changed the batteries. Did the unit hold calibration or did you have to reset it after installing new batteries? __________________ RodeWorthy '07 Mobile Suites 36RS3 #3910 Mor/ryde IS, Trailersaver TS3 hitch Level-Up with Remote Control 4 x 135W Solar Panels, Outback Controller, 4 x 6V batteries, Xantrex Inverter/Charger '08 Chevy 3500 dually Duramax/Allison