5thWheelForums.com - View Single Post - 2017 41RSSB4 ordered

Cummins12V98 · 10-10-2016, 12:48 PM

"Check underneath the front overhang (near pinbox) and make sure the bottom is secured to the frame (i.e. doesn't move up and down)."

YEP, mine was hanging down almost 1" I pushed it up tight and drove two #10 driller screws thru the trim pc into the frame tube steel to hold it in place. You could see where they had caulking to hold it in place, that sure did NOT work.

10-10-2016, 12:48 PM	#8
Cummins12V98 Senior Member Join Date: Feb 2013 Location: on the road Posts: 1,188	"Check underneath the front overhang (near pinbox) and make sure the bottom is secured to the frame (i.e. doesn't move up and down)." YEP, mine was hanging down almost 1" I pushed it up tight and drove two #10 driller screws thru the trim pc into the frame tube steel to hold it in place. You could see where they had caulking to hold it in place, that sure did NOT work. __________________ 2015 RAM LongHorn Dually Air ride Aisin 4:10's 2016 MS 39TKSB3 "Highly Elited"