Just be careful with drilling the Corian--it is a plastic base and will tend to melt if drill is forced too fast. But just about any type drill bit/saw blade will cut it if you are very careful. There should be instructions on the internet for 'drilling through Corian countertop' probably even some YouTube vids.
We had the peninsula on our '05 made into an island, and the cut was easy--but keeping the cut edge smooth was the hard part.
Joe
__________________
2016 Tiffin 40 QBH
2015 38RSSA, traded
2005 TK3 #1869, 10 yrs of memories,
2017 F450 KR--one more Ford is it
2009 F450 4x4-died; 2010 F450-retired
|