[MooseSuite]

The blueray media player output ( 3 wires) is hooked into the input on the AVS board.

The 2 outputs on the board plug ins ( red white yellow) go tho set 2 (bedroom) and 3 (basement)

The blueray will pay on sets 2 and 3 by selecting AV mode on the "Source" button on the remotes for 2 and 3.

However the main TV cannot be playing to the same source mode if you want to view your blueray on sets 2 or 3.

For example if you have a satellite tuner hooked into input on the AVS board you can watch the programs on sets 2 and 3 as long as the "Sat/CATV" mode is not activated/in use on your main TV.

Your blueray is hooked in via an HDMI cable to the Sony AV system. You can add devices as per the 3 remaining empty designated HDMI slots on your tuner. ie Satellite

You must use AV cable ( 3 wire yellow, white red) from output on your devices to input on your AV board to view on set 2 or 3. The board has only room for one set of AV cable

I hope not to confuse you.