5thWheelForums.com - View Single Post

waldmeer · 09-05-2009, 06:56 PM

I am using the Direct TV system. The two LNB's enable the TV in the bedroom to make selections different from the living room.

My MS has a Sony Theater System that the factory prewired for satellite. are there some special settings I need to make on the theater system as well as the winegard switch box? I hook up one LNB to the SAT1 and the other to the SAT 2 connector in the "Water Box" . Yes I am aware that the Winegard switch needs to be changed to SAT for each room.

My question is where and with what lines do I install the Direct TV box. IS that done at the TV or wired to go to the SONY theater system. Seems as if it has to be wired at the TV.

There is only one Signal wire/connector at each TV. Does that go to the DirectTV box and then out to the TV. Maybe my problem is in not knowing how to use the SONY Theater system.

09-05-2009, 06:56 PM	#5
waldmeer Junior Member Join Date: Aug 2009 Location: United States Posts: 12	SATELLITE TV HOOKUPS I am using the Direct TV system. The two LNB's enable the TV in the bedroom to make selections different from the living room. My MS has a Sony Theater System that the factory prewired for satellite. are there some special settings I need to make on the theater system as well as the winegard switch box? I hook up one LNB to the SAT1 and the other to the SAT 2 connector in the "Water Box" . Yes I am aware that the Winegard switch needs to be changed to SAT for each room. My question is where and with what lines do I install the Direct TV box. IS that done at the TV or wired to go to the SONY theater system. Seems as if it has to be wired at the TV. There is only one Signal wire/connector at each TV. Does that go to the DirectTV box and then out to the TV. Maybe my problem is in not knowing how to use the SONY Theater system.