5thWheelForums.com - View Single Post - mor-ride vs. center point

Motor31 · 05-31-2010, 09:07 AM

I have trailer air suspension on my rig. If it is the same thing you have (other than a different name) then it's 5 PSI per thousand lbs weight on the axles. Mine is still the single point inflation for both sides of the axle and I run at 80 PSI on my 38' rig. I scaled my rig loaded and the axles were supporting a bit over 14,000 lbs.

05-31-2010, 09:07 AM	#2
Motor31 Senior Member Join Date: May 2005 Posts: 2,130	I have trailer air suspension on my rig. If it is the same thing you have (other than a different name) then it's 5 PSI per thousand lbs weight on the axles. Mine is still the single point inflation for both sides of the axle and I run at 80 PSI on my 38' rig. I scaled my rig loaded and the axles were supporting a bit over 14,000 lbs. __________________ Mike Nancy and the fuzzies Fulltiming since June 2004 Volvo 660 MH tow vehicle 2005 MS 38RL 2007 Saturn Ion "toad" 2010 Gold Wing "piggyback"