View Single Post
Old 02-28-2018, 04:39 AM   #9
dmascheck
Senior Member
 
Join Date: Sep 2017
Posts: 136
While hooked up to shore power, the converter supplies the 12 volt DC directly bypassing the switch. If you disconnect from shore power the switch works fine. I installed a new switch thinking problems solved....WRONG. When I ran a continuity check on the switch I removed, it was fine and I had the same problem with the new switch!

Once you unplug from shore, the switch works fine or unplug the converter. You have to keep that in mind when working on anything that is 12 volt if you need the power off.
dmascheck is offline   Reply With Quote