|
Man, Mike.. you have had your share of these gremlins. Have you spoke with Van at Lippert? They really should offer better support. That stinks.
I would start looking at a valve bypassing but that is just a suspicion. When you had the legs dropping while retracted were the rams replaced, or what was the fix? I don't know if the seals in the rams could be leaking internally like they did on ours and cause it to drop under load, but that may be possible.
You might check if your rams are the early model smaller ones like we had and if so, the newer larger ones may sort all your issues out. Lippert should know by the trailer S/N . You can't tell by looking unless you remove them. Just a thought. I assume you don't have pinless front jacks.
Hope you get this sorted out quickly!
Bill
|