|
JD,
Look for a 12 volt light in a near by area and see if you can tap into it. The fan won't draw that much power so the wiring should be fine for the additional draw. A switch between the light hot side wire (before the light switch itself) and a ground would be all you need to run the fan and have it totally seperate from the antenna amp circuit. We use the amp all the time in ours as even in a strong signal area the picture is degraded without it. The only thing we use the batwing for is to get the local news and weather, otherwise we watch from our satelite dish.
__________________
Mike Nancy and the fuzzies
Fulltiming since June 2004
Volvo 660 MH tow vehicle
2005 MS 38RL
2007 Saturn Ion "toad"
2010 Gold Wing "piggyback"
|