[Motor31]

I had a minor leak in one of the jack hoses. It leaked at the connection point near the pump where it tied into the valve body. Since it was the hose leaking I couldn't repair the hose due to the crimp style connectors DT put on the hoses. As per Lippert, DT made and installed the hoses not Lippert. I went to a hydraulic hose shop with the old hose and they made me a new one while I waited for less than $14.00. This was the extension hose that went to the far side (door) ram. They also pointed out that with the new 2800 PSI pumps we may have a problem later on. The DT hoses have a working pressure of 2200 PSI, it's stamped on the hose. Changing the front hoses is a snap and inexpensive.